|
Non Rc Model Trucks and Equipment This area is for the custom builders of the "MODEL" world to show there NON RC metal and plastic creations and builds. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1914 Holt T-60 Track layer
I finally completed this model after finding a set of Die Cast tracks which looked like the ones on the 1:1 at a farm and Construction model show last weekend. They had to be shortened by two links but fit the bill alright. The model depicts a Holt unit which was built in Stockton California and one of the last T-60's to be built. My inspiration for this model came from my memories of seeing one of them grown over in a field in Fieldbrooke, California back in my early high school days and again a short time later in Redwood valley off Highway 299 just out of Blue Lake, going East. That one was also grown over in the brush and had a small redwood tree growing up through the floor. The latter was missing the track units and front tiller and was used to power a mill in the valley, which was nearby and only the foundation remained. Both units were about to disappear into history as they were slowly disintegrating from the elements. These units and units before them was where the name Caterpillar came from which was later adopted to the equipment we know today. When the first one rolled through Stockton, some one exclaimed that it moved like a Caterpillar and the name was born through the merger of Holt and Best companies.
The model is totally scratch built from Evergreen plastic and a few parts from the parts bin. The engine is a combination of two 1926 Mack engines spliced together and the cross valving rocker arms added to them, and the other details to make it represent a E10 gas engine of the time. The radiator and colling system also is scratch built and the fan belt is made from a 3/8 " wide rubber band cut down and spliced together to fit the engine. All braking, clutch and steering systems were made out of Brass wire and the gears for the Tiller and drive system I made from evergreen plastic. I added the trickle tank to the back as the one in Redwood valley looked to have one which fed oil down and underneath to the main and drive gears. The model was topped of by the addition of a water urn, cup and lunch box Also scratch built and then weathered to give it a lightly used look, as if it had just began on the job for a few months. On the back is a set of hay grapples which were used to drag turns of logs. The coming of these units and others like it finally sealed the fate of the horse, mule and oxen teams as far as log skidding goes in the logging industry. |
#2
|
|||
|
|||
Re: 1914 Holt T-60 Track layer
very nice
it is just begging for a motor lol |
#3
|
||||
|
||||
Re: 1914 Holt T-60 Track layer
Very nice.I like your weathering job. I have a scale model Holt 75 engine. It's got a few hundred hours to go before it'll run . Have you been over to our Antique Caterpillar Machinery Owners Club?
www.acmoc.org |
#4
|
||||
|
||||
Re: 1914 Holt T-60 Track layer
Muleskinner, Good to see the Holt here, good job! Enjoyed seeing you at the Harrisburg show. Fred
|
#5
|
|||
|
|||
Re: 1914 Holt T-60 Track layer
very nice model...especially since it is done with styrene...Who had the tracks and do they make them available for modelers... ??
Thanks for showing Jerry / |
#6
|
|||
|
|||
Re: 1914 Holt T-60 Track layer
very cool and a neat bit of history i have read about that somewhere in a few books that i have read lol awsome work keep it rollin we like pics here lol
__________________
I built this thing and have it working now what do I do with it? |
#7
|
|||
|
|||
Re: 1914 Holt T-60 Track layer
i have seen those tracks befor i think lol they look like the tracks off of a td14 or 18 replica that i have seen i have a td 14
__________________
I built this thing and have it working now what do I do with it? |
#8
|
||||
|
||||
Re: 1914 Holt T-60 Track layer
Great job, thank's for sharing! Later, Neil#2 aka doodlebug.
|
#9
|
|||
|
|||
Re: 1914 Holt T-60 Track layer
I'm not sure who makes the tracks or what they came off of, as the guy who had them said he accumulated them from something and couldn't remember where. He said they were taking up space and knew I could use them on something. This model has been shelved for about nine months or so because of th lack of tracks. They did come in handy though no matter what they are off of.
Willam |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|