Truck parts - 1:Tamiya

[Rimrock]

Custom parts I have designed for Tamiya size trucks shown bellow. I'm mainly into dumper trucks, but the parts can be applied at different types of trucks, semi tractors and so on.

#10110 Transfer case, ratio 1:1, for permanent All Wheel Drive. 85 USD (+shipping)
(NB! Drive shafts for illustration only, not included)
This compact transfer case is first of all developed for short wheel base trucks, where space is tight, e.g a standard Euro semi tractor where one wish to install a driven front axle. It hooks up directly to the underneath of the standard Tamiya frame rails. Intended to be working along with a compact gear motor, as the Servonaut GM series. As the transfer case is located bellow the chassi, there is good space for placement of e.g tipper spindle gearmotors between the rails, as illustrated on the sketch of the dump truck.

[Rimrock]

#10103 Bracket for Servonaut GM32 planetary gearmotor. 22 USD (+shipping) (Motor not included, but can be delivered upon request)
This bracket enables the Servonaut motor, or similar, to be placed at an angel above a driven front axle, as shown in the sketch of the euro dump truck above.

#10105 Drivers cabin lift kit, 12mm. 36 USD (+shipping)
This is a lift kit for Tamiya trucks; Scania, MAN, Mercedes.