RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2018, 06:44 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Lesu Liebherr 574 loader kit build

Hello everyone. For all those that are interested I decided to start a build thread of the loader kit.

https://postimg.org/image/vizdr8v5x/][/url]


For those that want to watch here is the un-boxing video I did: https://www.youtube.com/watch?v=Ki0_S0Dvq6s&t=336s

I'm going to paint this model first. I don't really want to build the entire model only to have to tear it back down and deal with the hydraulics a second time.

I will post another up-date when I figure out how to post pics. Stay tuned.

Last edited by Table Top Trucker; 02-10-2018 at 05:43 AM.
Reply With Quote
  #2  
Old 02-06-2018, 06:46 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build













Here are some raw picks of the front fenders and one of the side fairings. Items are plastic and had a coat of primer on arrival. The leading edge of the front fenders needed to be straightened, I did this with a sanding block and 320 grit paper. Didn't take much sanding.

One of the side fairings was a little rough inside. I touched it up a bit, but Frankly nobody is really going to see it. Its a piece of heavy equipment, so I don't expect it to look perfect. and hopefully the inside of the fenders will be caked in dirt a decent amount of the time.

Last edited by Table Top Trucker; 02-06-2018 at 06:56 PM. Reason: I'm a newbie, need i say more??
Reply With Quote
  #3  
Old 02-06-2018, 07:07 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

I grew tired of looking for the correct Liebherr paint, so I started looking for other options. I decided to go to Tractor Supply and take a look at what they had. I ran into this stuff here:



Rustoleum farm & implement in Massey Ferguson gray. I think this color will be a very close match to the correct Liebherr gray.
I have already painted both side fairings, front fenders, bucket and rear main chassis.

I like this paint and it seems to cover equally well on metal and plastic.

Stay tuned and thanks for watching. More pics to come soon.
Reply With Quote
  #4  
Old 02-06-2018, 07:37 PM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

I saw this on FB, & watched the vid, as well as subscribed to your chanel. I'm glad you found your way here with this project. I like that there ISN'T drama here, VS that social media forum! I'm anxiously watching this build.
Reply With Quote
  #5  
Old 02-10-2018, 05:02 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Got a few more post paint pics:
rear chassis after paint:

https://postimg.org/image/k6ms9ger9[/url][/url]

https://postimg.org/image/put30ddyt/][/url]

https://postimg.org/image/irl7krvol/][/url]

https://postimg.org/image/qx39ixzd1/][/url]

Z-bar and axle mount: https://postimg.org/image/6071eagrp/][/url]

Bucket money shot: https://postimg.org/image/k81bh0b85/][/url]
https://postimg.org/image/7tejgpmat/][/url]

https://postimg.org/image/j712rdenp/][/url]



https://postimg.org/image/llocy8l05/][/url]

Last edited by Table Top Trucker; 02-10-2018 at 05:10 AM.
Reply With Quote
  #6  
Old 02-10-2018, 05:17 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Now a moment of silence for Steve Ingraham (IHBuilder/IHB scale models)

I never got the opportunity to meet Steve in person, but I know his family will miss him. I know us folks here @ rctruckandconstruction will miss him and his talents.


R.I.P. STEVEN INGRAHAM.
Reply With Quote
  #7  
Old 02-10-2018, 05:39 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Finding the proper Liebherr paint is proving to be a P.I.T.A. In place of the Liebherr red-orange I decided to use Dupicolor engine enamel in chevy red-orange.
https://postimg.org/image/jmcckmdid/][/url]

I already painted the bucket lift arms and the main engine cowling. More pics to follow as soon as the paint cures. I think this color is going to work great. Thanks for watching !!
Reply With Quote
  #8  
Old 02-10-2018, 05:47 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Skeeter, thanks to you and Pigeon-farm-boy for subscribing to my you-tube. Please let me know if I have missed anyone, and thanks for watching!!!
Reply With Quote
  #9  
Old 02-10-2018, 07:16 AM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Great looking kit. I've studied the build manual, proffessional step by step drawings, I can see they have but some hours into this.

From what I see, the hydraulic tank is built-in to the rear frame. Is it a fully welded tank, or there are some gaskets?
you might have control of it, but anyway; it is suggested to use thread lock on all hydraulic niples, as Loctite 542. It's actually great that it comes in a kit form, then one can take the time to mount the hydraulics better than chineese assembly line workers, that usually are in a big hurry.
__________________
Soyland Industrier

Last edited by Rimrock; 02-10-2018 at 09:58 AM.
Reply With Quote
  #10  
Old 02-16-2018, 10:35 AM
code3pse code3pse is offline
Newbie
 
Join Date: Feb 2018
Posts: 4
code3pse is on a distinguished road
Smile Re: Lesu Liebherr 574 loader kit build

Hello! I have buy this loader me Too! If I need some questions could you Help-me ? Thanks!
Reply With Quote
  #11  
Old 02-25-2018, 09:51 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

CODE3PSE: I will try to help anyone that has questions about this loader as best I can.

Last edited by Table Top Trucker; 02-25-2018 at 11:08 PM.
Reply With Quote
  #12  
Old 02-25-2018, 11:11 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

I just posted the first video up-date of the loader build; https://youtu.be/pxIb8fyCE2U it shows some of the paint progress and a couple other details.
Reply With Quote
  #13  
Old 02-25-2018, 11:13 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

in response to rimrock: the rear section of the frame is the hydraulic tank. it appears to be welded and hopefully pressure tested.
Reply With Quote
  #14  
Old 02-27-2018, 11:57 PM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

here are some early build pics. 1st up: axle mount:
https://postimg.org/image/fyi1b51dx/][/url]

The axle mount rides on two flanged bearings and a nice pivot pin, everything is retained with an e-clip.

steering rams: https://postimg.org/image/nr8p34f2t/][/url]

pivot: https://postimg.org/image/5ofmbx6dh/][/url]

Last edited by Table Top Trucker; 02-28-2018 at 12:35 AM.
Reply With Quote
  #15  
Old 03-01-2018, 12:26 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Here is the hydraulic pump: https://postimg.org/image/dh6a3vwx1/][/url]


The hydraulic pump was not assembled properly, I had to re-clock the pump motor. It was a simple operation. I removed 4 bolts, rotated the housing 90 degrees and put the bolts back in.

The bolts in question: https://postimg.org/image/raumt02dx/][/url]

Last edited by Table Top Trucker; 03-01-2018 at 12:32 AM.
Reply With Quote
  #16  
Old 03-01-2018, 12:41 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Here is a shot of the transmission: https://postimg.org/image/ogrhfjks5/][/url]

The holes in the transmission did not line up, I had to run a drill bit through them and finish with a file. I have to say, I wish the mounting bolts for the transmission were spaced out a bit. I think it would be a more stable mount. just my opinion.
I don't want to sound like I'm bashing Lesu to bad here. Some minor issues are to be expected with a new model and these issues are nothing a decent modeler can't handle.
Reply With Quote
  #17  
Old 03-01-2018, 12:49 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

I do have a gripe here: Lesu did not include the procedure for mounting the motor to the transmission In the assembly manual. I was able to figure it out, but other people may not be as lucky. Hopefully they will include a flyer in the box in the future or update the assembly manual.

Last edited by Table Top Trucker; 03-01-2018 at 01:01 AM.
Reply With Quote
  #18  
Old 03-01-2018, 01:00 AM
Table Top Trucker Table Top Trucker is offline
Newbie
 
Join Date: Sep 2017
Posts: 57
Table Top Trucker is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

Here is a shot of the motor with the mounting plate bolted up: https://postimg.org/image/q8kgagrad/][/url]

Although the drive motor has a D-shaped pinion shaft the pinion doesn't have same D-shape. The pinion is a press fit more or less and does not have a set screw.

On the plus side the transmission had plenty of grease in it and operated smoothly.

Here is a pic of the motor\transmission assembly: https://postimg.org/image/3wmnh1plh/][/url]

Last edited by Table Top Trucker; 03-01-2018 at 01:05 AM.
Reply With Quote
  #19  
Old 03-01-2018, 11:52 AM
scottyk scottyk is offline
Newbie
 
Join Date: Jun 2013
Posts: 112
scottyk is on a distinguished road
Default Re: Lesu Liebherr 574 loader kit build

That is strange there is no setscrew on that pinion gear! Did you use some 603 loctite or anything for a little extra grip?
Reply With Quote
  #20  
Old 03-01-2018, 11:48 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Lesu Liebherr 574 loader kit build

Is the metal parts steel or aluminum?

Any ABS bushings in the hinge points?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
Reply

Tags
kit, lesu, liebherr, loader, wheel loader


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.