|
General Discussion A place to post off topic discussions. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
What's your favorite tool?
I was cutting a piece and turned on the mill when endmill was below part, took a chunk out of endmill and probably have to tram mill now. Not happy!! These two endmills are my two favorite tools, well they were, the longer one got chewed up by too deep of cut on some hardened tool steel. Just got me thinking what everyone els has for favorite tool, machine.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#2
|
||||
|
||||
Re: What's your favorite tool?
Might sound dumb but I get a kick out of my cordless dremel, use it for all kinds of jobs. Then again don't know what I would do without my air compressor really handy to have.
|
#3
|
||||
|
||||
Re: What's your favorite tool?
I have no pics right now because my favorite tools are in my tool box at work. I've got wrenches from my grandfathers tools, from a manufacture that doesn't exist anymore, but the wrenches still do to this day.....Guess that's why they ain't around anymore
and a few handmade pry bars and chisels made by him which I use all the time.they work so well, the angle, the strength. He knew what he was doing when he made them way back then. I see his initials engraved on them each time I use. |
#4
|
|||
|
|||
Re: What's your favorite tool?
My favourite tool is my Cameron drill press really accurate and tiny and I can move to different benches . My number 2 tool is my Delta 10 inch table saw good for wood aluminum and brass sheet !
|
#5
|
||||
|
||||
Re: What's your favorite tool?
My Mazak
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#6
|
||||
|
||||
Re: What's your favorite tool?
My calipers like the one in RW's picture above.
|
#7
|
||||
|
||||
Re: What's your favorite tool?
"What's your favorite tool?"
The one that saves the day (and my butt) on the project I'm working on! Really... I don't have a fancy mill machine, an expensive lathe or even a 3-D printer (well, not yet), but if I did I would be in more trouble as far as things to do than I have now! Jeff |
#8
|
||||
|
||||
Re: What's your favorite tool?
|
#9
|
||||
|
||||
Re: What's your favorite tool?
5WR Vicegrips!
|
#10
|
||||
|
||||
Re: What's your favorite tool?
This Milwauke tote bag with 18v drill & 1/4" impact, best cordless tools I've ever had... might charge each pack 3x a yr... entire month of seeding the 1/4 impact used several times daily buzzing hose clamps to clear seed run blockages, one charge with power to spare! I think I got them summer of '10.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#11
|
||||
|
||||
Re: What's your favorite tool?
Years ago I bought a drill and impact cordless set, I needed a new drill and it was cheaper with batteries to get the combo. I never thought I would use the impact for much. After having it and driving 6" screws into gluelams I don't know how I put homes together without one!!! I hear ya Joe, cordless drill have come a long way. Building decks I rarely use any corded tools, except for chop saw and circular saw. Have 4batteries on job and only have to change once in a full day of driving deck screws into decking, three screws at each joist only pre drilling end pieces. That is also one of my favorites. Have this one in shop and I think I'm going from December on last charge. Use it to change collets
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#12
|
||||
|
||||
Re: What's your favorite tool?
you keep posting pics like this were gonna have to talk!!!
|
#13
|
||||
|
||||
Re: What's your favorite tool?
I love my 6mm double end counter sink / deburer and use it every time I need to drill any thing.
No pics as my camera isnt working. Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 Love my Kenworths To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#14
|
||||
|
||||
Re: What's your favorite tool?
More than anything Cooper it's battery technology has improved immensely... I bought a 3spd Dewalt cordless drill, maybe 2002, always stored in the warmth of the house, not used too often & both batteries couldn't hold a charge a couple yrs later. That 14v Dewalt cost more than the two Milwaukes together.
My neighbor has Bosch cordless gear, couple yrs ago framed & sheeted in a 26x26 garage in one day with cordless skill saw, 3 packs worth... impressive!
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#15
|
||||
|
||||
Re: What's your favorite tool?
Yep, on my 18V milwuakee hammer drill, 1 batt will out last 1 24volt batt on my former dewalt hammer drill . Now the dewalt powers the cat 990 . Dewalt has good motors , but their batts aren't the best .
__________________
RIP FreddyGearDrive 2-12-59/12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#16
|
||||
|
||||
Re: What's your favorite tool?
This Gadget is good for bending forming plastic stuff....no risk for overheating
[IMG]DSC_2222 by Bo Wallen, on Flickr[/IMG] Link for more info. http://www.ebay.com/itm/850-SMD-Rewo....c100677.m4598 Reviced link. Last edited by Bo Wallen; 09-27-2017 at 10:11 AM. |
#18
|
||||
|
||||
Re: What's your favorite tool?
This is a current link of Sept 27 2017 http://www.ebay.com/itm/850-SMD-Rewo....c100677.m4598
Last edited by Bo Wallen; 09-27-2017 at 10:13 AM. |
#19
|
|||
|
|||
Re: What's your favorite tool?
Demonstration ? Please
|
#20
|
||||
|
||||
Re: What's your favorite tool?
So now i have to get a Go Pro.........and then i have to learn how to post videos......ai ai ai........OK off i Go
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|