|
|
|||||||
| Farm Tractors and Implements Discussion of farm equipment |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-06-2021, 05:55 PM
|
|||
|
|||
Steiger Panther IV
Good Day everyone,
after more than one year of planning, having spent more than 250 hours in front of my PC I finally started working on my beloved Steiger Panther IV. Back in 2017 during a road trip I visied the Fargo Plant in Fargo, ND       I got to take lots of photos in 2009 back in Australia that really helped.    11 years a batchelor and a masters degree in engineering later I was finally capable of designing one in Tamiya scale. Since I live in a metric world I used mostly 1mm, 1,5mm and 2mm sheet metal that gets welded together using my Lampert U5 welder. Lets start with the cab:             Next step axles and frame. 
Last edited by Quad-Dog; 03-06-2021 at 05:59 PM. 
|
|
#3
03-26-2021, 04:40 PM
|
|||
|
|||
Re: Steiger Panther IV
thx guys.
Quote:
Continued with the axles. They will later on house two motors each for decent traction.    Base of the cabine and part of the main frame  I love the spotwelding   Continued on the main frame:   Done... 
|
|
#5
03-26-2021, 09:38 PM
|
||||
|
||||
|
Re: Steiger Panther IV
:O This is so cool! I'm not planning to do an engineering masters degree, but I can probably manage 11 years of not marrying anyone. Do you think that's enough for me to be allowed to do an awesome build like this?
Last edited by Wombii; 03-26-2021 at 09:39 PM. Reason: I didn't read properly
|
|
#6
03-29-2021, 06:50 PM
|
||||
|
||||
|
Re: Steiger Panther IV
Beautiful work
 I have a 1982 Panther CT-1325 that my dad bought new. It has the 3 piece front window for a wider, more rounded cab, I luv that tractor! It was a big tractor in its day & decades more advanced than its competitors... I still use it today to pull a heavy harrow with granular chemical applicator, I get a few days use from it every spring... it's gotten too small to pull anything else, unfortunately... they don't make 'em as quiet & comfortable as they use to.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe
|
|
#7
06-17-2021, 05:52 PM
|
|||
|
|||
|
Re: Steiger Panther IV
Thx guys
I´ve actually been thinking about looking into building the CT-1325 Had a little play with the 3D printer  Checked the tread  And checked the interior  Built a few steps  And put the cab on top of the frame 
|
|
#9
06-19-2021, 10:56 AM
|
||||
|
||||
|
Re: Steiger Panther IV
That's really slick!
I love how you did the chassis tab&slot thing. The printed parts are looking good
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time...
|
|
#10
07-07-2021, 07:09 PM
|
||||
|
||||
|
Re: Steiger Panther IV
This is AWESOME!
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#13
07-10-2021, 04:40 AM
|
|||
|
|||
|
Re: Steiger Panther IV
Thx guys. Printed parts will be replaced. I´m not satisfied with the surface of the parts. Would need too much grinding.
I´ve done some testing what tires might look like.   Not 100% sure if it will be the left or the right one...  
|
|
#15
07-20-2021, 11:57 AM
|
||||
|
||||
|
Re: Steiger Panther IV
Those parts look beautiful, and nice job on the tiny welding!
That machine is going to be a beast.
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time...
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
