|
RCP’s Aluminum Gravel Boxes and Accessories Welded aluminum dump boxes and more |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
End Dump Trailer and Dolly
|
#2
|
||||
|
||||
Re: End Dump Trailer and Dolly
Is that normal up there? ? Seems a little long
To go behind a dump truck |
#3
|
||||
|
||||
Re: End Dump Trailer and Dolly
I don't know what the rules are in Alberta. The box is 24". Scales out to 28' i think. You know me, I just try to build what I'm asked to.lol I think it will be OK as the truck is a tri-drive and will have a 19" dump box. It's gonna haul a lot of dirt all together!
|
#4
|
||||
|
||||
Re: End Dump Trailer and Dolly
H€ll yeah!! We have a few baby dumps down here
They did heavy dirt over the bridges |
#5
|
||||
|
||||
Re: End Dump Trailer and Dolly
Going to be following this one Already looks good keep it up!
|
#6
|
|||
|
|||
Re: End Dump Trailer and Dolly
Hey Mark I thought they did away with the 120 permits there and 80 was the max especially going over the bridges?
__________________
Steve |
#7
|
||||
|
||||
Re: End Dump Trailer and Dolly
Sweet Reg! Hoe much does a dump trailer like this cost without the tarp set up?
Ken |
#8
|
||||
|
||||
Re: End Dump Trailer and Dolly
With or without the dolly?
|
#9
|
||||
|
||||
Re: End Dump Trailer and Dolly
|
#10
|
||||
|
||||
Re: End Dump Trailer and Dolly
Thanks RW. Yes you need a grapple skidder for sure! Probably could use it to pickup "logs" from your Great Dane too.lol
Probably around $1150-$1200USD using a flatbed trailer as a base like this one. In this case the customer already had the trailer so he shipped it to me to modify. That knocks around $200US off. Tarp is all mounted up now... Last edited by RCP57; 07-30-2016 at 09:54 AM. |
#11
|
||||
|
||||
Re: End Dump Trailer and Dolly
I was out of the shop for a couple of weeks but have been back working away on this since Monday. Two long work days have this almost ready to go. Just a few small details this morning and then it will be torn down to receive it's velvet black powder coat.
I was asked to fit a stock King rear bumper to the trailer so I modified a stamped steel trailer bumper mount to except the KH bumper. It had to be lowered as well to clear the overhang when the box is up. The owner has a nice new bumper to put on. This old beater was just installed for testing... Up front the "quad wagon" needed some shorty fenders so I made those up. I also made a plate to cover over the open frame. I gave a final "trim" to the ladder as well and mounted it up. Next up was the dolly. I was provided a perfect set of KH rails with the axles but rather than waste them I decided to make a new set and only drill the necessary holes for a cleaner look. Once the rails were ready and installed I got started on the drawbar and mount. And finally, after making a couple of pintle hooks, a few pictures outside! |
#12
|
||||
|
||||
Re: End Dump Trailer and Dolly
they dropped the 120 down to 117 with a 3% grace= 120 LOL
|
#13
|
||||
|
||||
Re: End Dump Trailer and Dolly
Wow reg! You just keep impressing me with your builds!! Looking pretty good!! I have to go revisit your skidded thread, I realized I could use one. Every time the wind blows small branches fall, and after watching one of your videos I realized that would be perfect for skidding branches!! Build another one of them and ship it to me for testing. .
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#14
|
||||
|
||||
Re: End Dump Trailer and Dolly
Oops thought it was rcp compound thread, didn't want to derail the thread,
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#15
|
||||
|
||||
Re: End Dump Trailer and Dolly
Looks great Reg. I'm building the same basic set up to pull behind my 6x6 dump, yours looks a lot better but Im having fun with it. I'm attempting to make my draw bar interchangeable so I can run the long stinger pulling the dump and a standard short hitch for pulling a set of doubles with the same dolly.
|
#16
|
||||
|
||||
Re: End Dump Trailer and Dolly
Awesome setup Reg
|
#17
|
||||
|
||||
Re: End Dump Trailer and Dolly
Quote:
Thanks Brandon. It's in at the coating shop now so we'll see how she oolks when I get it back and reassembled. I already know that I want one for myself. |
#18
|
||||
|
||||
Re: End Dump Trailer and Dolly
Here's the link Reg, I didn't want to muck up your thread
http://www.rctruckandconstruction.co...656#post147656 It's post #101. |
#19
|
||||
|
||||
Re: End Dump Trailer and Dolly
Well she's all done and looks very nice!
Walk around video https://www.youtube.com/watch?v=xrffMcV_XO8 |
#20
|
||||
|
||||
Re: End Dump Trailer and Dolly
Told you mine never looks that good!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|