Scaleart - assembling an Arocs 8x8 roll on roll off kipper

[Rakthi]

Good point Christian, thought about that too! Will only glue the holder to the cylinder first. There should be just enough room to push the hose through without too much effort once the glue has set. That is why I first want to try with a temporary fix (zip tie or tape)on the holders, to make sure the hose does not move too much or rubs. Last thing I want is a leaky hose spouting hydraulic oil!

Will see, maybe I have some time tomorrow. Will have to take a good look on how to run the hydraulic lines too.