1/16 Oliver Dozer Conversion

[Rvjimd]

I got a reply back from the help desk of the motor controller. My gut reaction tells me that it doesn't really put out the amps to the RX like they claim. But, it also doesn't seem to like the hitec 645 mg servo. I plugged in an old Futaba servo and it seems to work, if it will lift the blade like the hitec is another story yet to be determined.

I had exactly the same trouble with my dragline using the same controller and same servos. I solved it on the dragline by using a separate battery and power supply for the RX and rope servos.

I spent most of the afternoon figuring that out. By the way, according to the specs for the hitec servo, it SHOULD work with the 2x5 motor controller so somebody doesn't know there own product. Very frustrating afternoon.

Arg...