Scaleart - assembling an Arocs 8x8 roll on roll off kipper

[Rakthi]

Tried the cabin on the chassis.





Tested the locking mechanism







Now time for the air intake to be put on. (takes 4 M2.2x6 self tapping screws). 2 in the roof and 2 in the back.



Alerted by the pictures in the link Christian provided, I knew there would be a problem with the locking mechanism interfering with the intake. So only temporary screwed on with 2 screws.



So a bit of plastic had to go. (the cut will be cleaned up)



Now proper install of the intake. Found that it was easiest to first do the top part.









Next up would be the interior of the cabin.