JBC limited NZ

[andyathome]

today I finished the painting and cleaned up the cables on the bottom arm and installed two new toggle switches on the engine cover, 1 for the lights and the other for the grinder which is fused at 3amps.
also had to repaint the arms due to the new colour matched paint was different, spoke to the paint lady and she said sorry and gave me two cans for the price of one

Then I made up some spacers for the track bodies, 15mm wider on each side.
this has now caused me another problem, as it only just fits on the lowboy
I need to rewire the track motors now because the cables are too short, and I found out why I blew a track esc, wires way too short and shorted together
pictures.





wider track setup



and the problem Ive created



cheers andy