|
Farm Tractors and Implements Discussion of farm equipment |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1/16 John Deere 9620rx
This is my work in progress 1/16 John Deere 9620rx.
Last edited by davaante25; 09-14-2016 at 03:32 PM. Reason: Made an Attachment Error. |
#2
|
|||
|
|||
Re: 1/16 John Deere 9620rx
My current progress.
|
#3
|
|||
|
|||
Re: 1/16 John Deere 9620rx
More Progress
|
#4
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Last edited by davaante25; 09-15-2016 at 11:32 PM. |
#5
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Looks really good and seems to be a smooth operation. Nice job.
Chris |
#6
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Thank you
|
#7
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Nice conversion! Runs pretty good...
__________________
regards, Frank |
#8
|
||||
|
||||
Re: 1/16 John Deere 9620rx
Looks nice, do you have a big disc or plow or planter to pull behind?
How was the conversion? Jim |
#9
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Thank you. I don't have any implements at the moment. I plan the get the 1/16 Lemken Air Drill Solitair 9, or the 1/16 John Deere Disc 637 Flex Fold, and install firgelli actuators on them to make them functional. The build took about a week and 1/2 to finish. I would say that the hardest parts were cutting out the idler wheels, and making the main drive wheel compatible to the axle shafts. It doesnt have a good turning rate. That's the down side, its turn wide. I now have to fit the main drive wheels with teeth to catch the tracks a little better to reduce slipping when pulling.
|
#10
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Hi,
What make is this model that's converted? Would love to have a go and converting one. Thank you |
#11
|
|||
|
|||
Re: 1/16 John Deere 9620rx
Its an Ertl 1:16 scale John Deere 9620rx
|
#12
|
|||
|
|||
Re: 1/16 John Deere 9620rx
What kind of Axles drivelines and transmission did you use?
|
#13
|
|||
|
|||
Re: 1/16 John Deere 9620rx
A nicely done conversion!
|
#14
|
||||
|
||||
Re: 1/16 John Deere 9620rx
Yes what did you use for the trans.? When I first watched the video, it sounded and looked to me that you had a motor for each track. But then I saw the pics of the single motor, trans, and the driveshafts.
That drive motion is very tight. No play. I like it. That will fair well for more precision. |
#15
|
|||
|
|||
Re: 1/16 John Deere 9620rx
I used a Rc4wd R2 BLACK CRAWLER TRANSMISSION V2, two Tamiya King hauler axles, Rc4wd punisher drive shafts.
Last edited by davaante25; 02-21-2018 at 05:34 AM. |
#16
|
||||
|
||||
Re: 1/16 John Deere 9620rx
Did you do a Case 620 conversion?
__________________
Giving up is not an option!!! Rob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|