Led help please

[thebigo]

Originally Posted by Jakyat

Alright, im aware there are lots of good threads for leds. I've read through plenty of them but still don't have the answer I'm looking for. For my build , i will have about 30 different led lights running them all with 4 different circuits;
1) 10, rear facing (4, 8mm & 6, 5mm3volt) all on one circuit.
2)cab clearance + another 6 clearance (3 on ea side) so 11, 3mm 3 volt on this circuit.
3) 4, 5mm leds- headlights
4) 4, 8mm leds- work lights
My thoughts; i want to use 4 different channels on my X- plus module and supply it with its own power source, rather than the main reciever. I have purchased some reciever activation switches specifically for the purpose. My thoughts were , by doing it this way, would save me from figuring out all the resistor values...... my question is, how many volts should I supply the x-plus module with?

Try going to spectrum's web site, but off the top of my head I think the receivers, (spectrum), are between 3.5 volts and 6 volts output so i would think that that is what you would power the x- plus with, but not sure. Or you could try calling Horizon hobby.

David