Cabin Fever

[JAMMER]

carp thanks a lot. Steve I told you if it wasn't for bad luck I wouldn't have any. When it was running it could do some digging but I looked at it and Steve from Pittsburgh with the walking dragline looked at it and the soldering wasn't to good. I'll take the cylinder all off, strip the paint and silver solder it with 50 % silver solder. Have to do the front cap and the line that feeds the oil to the top of the cylinder. At least all was not lost I got to run Scott Mack while he ran this Unit drag line he is getting real good with is as long as he don,t try to talk while he is operating it I am going to have to get him a muzzle. All kidding aside he is good with it. Ed