JET 53' Drop Deck/Spread Axle/Beavertail Trailer.

[Tamiya Cowboy]

Ok boys and girls here we go finally got my camera back so I can get some picks up of this trailer build.


Ok so here is one blank rail and one with the 1/2 angle bolted to it with 1.5mm screws. All screws are drilled and taped.


So here is a pick of the end of the rails with the taper cut in them laying on the 1/8 inch deck.



Here is a pick of the lower deck all bolted on with 3mm counter sunk screws that are 4mm long with nylock nuts on them.




Ok 2 more picks. just a little mock up of how the axles will look when up the trailer.


Here is a close up pick of how the wedico truck tires look as low pro tires on a tamiya wheel.


So that's it for right now I will be working on the upper deck some tonight and hopefully have the axles bolted up under it tomorrow..