D8R +463 in 1/5,6

[D8R]

RC farmer,cowboy, Pugs and all other, thanks!
About the tubing, have had thoughts about crome plate it before, but couldn´t remember how I put those parts together. When you mentioned it I had to look into if it could be possible. Did take the machine apart tonight (will go sandblasting this week) and could see that there´s a possibility to break the tubing from front wheel assembly. It´s only spotwelded fron inside

Not so good weldings, this was done some years ago and among the first parts that I tried to weld, have got a bit better now. Will try drill out those 4 weld spots next weekend. Did try to find some stainless tubes with 55mm in diameter but this is not available.

This is what the frame looks like when everything is taken away (oops, need to klean those work benches )

Dan