DIY Hyd Pump

[td9clyde]

yea ok heres the thing not all of us run in 1/14 th scale here Joe hopefully as you have seen there is alot other models that are bigger and some are smaller if there was a little bit higher preshure pump around the same size as the pumps used in 1/14th scale models it could be used for 1/14th and bigger to me honestly so far what i have seen is that the hydralics thus far is slow it is hard to build a model that works like it should if it makes you mad everytime you run it cuz it is slow real time is hard to distinguish scale time/or speeds why not use a drill motor with the planetaries?not high speed but has torque most to real hydralic pumps run at 2200 rpm's at the most on equipment and some are less

(The only problem I have ever had is oil leaking past the input shaft & into the electric motor that drives it)

if that was the main problem why not put in a weep hole so it will drain between the two parts there is alot of varibles with pumps and preshures just my two cents