Volvo EC300D

[elliot330]

FYI...

I've seen the inside of a Damitz valve and they are approx 8mm in diameter.

I recently changed my pump to a Damitz brushless pump (flow rate 450L a minute), Mr Damitz explained to me that its not about pressure, but about volume... albeit you still need pressure to lift a heavy object. ( I know very little about hydraulics :-) )

As an example, the release valve in my dumper is set to 10 bar, the steering is quicker than is was with a Jung pump running at 16bar, yet it'll still tip my daughter out the back and she weighes 17kgs aka 40lbs.

Without checking the flow rates of the Jung, I assume 0.3 equals 300l a minute?

With regards to the gear channel, you'd need to check whether you can mix that channel in your radio.