My Stretched globeliner

[dabears]

Well with the antisipation of parts coming in this week i did a little cleaning in the workshop this week so id have the room and could find what i needed


Then i got the truck ready for surgery


So today i came home to a package from Russ! Boy was i happy!! heres what i got



He got it exactly the way i wanted it!!!! LOVE IT!!

So i knew the time had come to make some mods on the truck so i measured 8 times and marked the area



Then got out the dremel with the metal cut off wheel....
Started cutting


Fhew that came out good now the other side


Just about 1 inch off on each side


Test fit


Then after breaking 2 drill bits i got the new screws in and tight
cut the decking to where i wanted it and now here is the new rear end of the truck





Now i have a lot more clearance room for the lowboy as well



So now i need input on this..... few options i can go with it
1. Make all 6 turn signals
2. Make outer 2 turn inner 4 brake
3. Make inner 2 turn outer 4 brake
5. Make all 6 brake and move turn signals to the outer 2 on the light bar on the rack mount
6. Make outer 4 turn and inner 2 brake.....
I cant decide now... PLEASE help me i dont have duel leds or all 6 would be brake and turn


Also i plan on tying into the trailer portion of the mfu without the MFU trailer harness. but just for the brake lights... the turn will just be spliced into the original rear turn signal wires.... does anyone know which 2 prongs on that portion of the mfu do i want???

Thanks for looking!!