Re: My Dump Trailer
The cross members and the top rail were water jetted the pieces in between the top rail and the crossmember are just 1/4 by 1 1/4 and 2 inches milled to length. I got the tail gate but i forgot to take a picture of it. It is 1/4 inch water jetted outer rails and one down the center then is covered with stainless on the top bottom and front side the inside piece is a piece of aluminum that slides into the stainless lips. The trailer is 31 1/2 inches long. Ed
Last edited by JAMMER; 09-22-2010 at 06:42 PM.
|
09-22-2010, 06:29 PM
Threaded Mode