Re: ok i did it!
3. you should redo the bucket linkage. thats the first thing to go on the stock bruder. the boom itself is sturdy enough that the weight of the stock bruder will not allow you to damage it! you will drag and tip the model way before the plastic snaps.
it took me 25lbs of weight in wet ground (not mud) trying to do a 360 pivot to snap the stock tracks.. you aren't even going to get near 8lbs total so you are good with all stock components but the bucket H link
welcome to hydraulics. you wont stop there. then you will want more, so you will start doing metal.. and it keeps on going.
|
02-19-2013, 12:15 PM
Hybrid Mode
