Menck M90 german rope excavator 1:16

[Seilbagger]

Originally Posted by Rvjimd

Wolfgang,

On your dragline what transmitter style and how do you set it up?

What sticks perform each action?

Left stick center - no movement?
Left stick up - hoist up?

I am going to try using a DX6I on my Menck M251 conversion, wonder how to configure for ease of use and smooth operation .

Thank you for the videos of your projects!

Jim

Hi Jim,

the dragline:

sticks in center= no movement

left stick right/left = turning
left stick forward/back = lift up and down the bucket or the clamshell bucket

right stick right/left = lift up and down the boom
right stick forward/back = drag rope for the bucket or close/open the clamshell


One channel is for switching two controllers (switcher ON/ON wit a servo) from the drums to the driving motors


the backhoe

sticks in center = no movements

left stick right/left = turning
left stick forward/back = lift up and down the boom

right stick right/left = close and open the bucket
right stick forward/back = pull the bucket to the excavator


One channel is for switching two controllers (switcher ON/ON wit a servo) from the drums to the driving motors


Best Regards and hope i could help you

Wolfgang