|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rookie Custom Globe Build
Hi Guys
I have seen a lot of great trucks on this site which has inspired me to build my own Custom truck. It will be a mild custom due to my rookie custom building ability and I will probably need a lot of help along the way. I have been in this hobby for 20 plus years and today I mostly collect and build kits having accumulated over 220 models of mostly cars, boats and helicopters of various scales. I have built stock Tamiya trucks in the past but never attempted building a truck using the many aftermarket parts available today. hopefully this picture shows up in the thread. This is a test...lol |
#2
|
|||
|
|||
Re: Rookie Custom Globe Build
Custom rails ordered and arrived. At the time I didn't see the listing for globe rails so I ordered king rails with a 4" extension from Joe's. Of course I didn't take into consideration that the king is a longer wheels base ( like I said ROOKIE!..lol ) So I have since ordered the correct rails and will change over but I will continue with these rails for now
I am not going to take a ton of pictures of the stock part builds because I think everyone has seen these a million times over and there is not much exciting about the stock parts being built. Below is the srvos and front cross members; Rear suspension; |
#3
|
|||
|
|||
Re: Rookie Custom Globe Build
|
#4
|
|||
|
|||
Re: Rookie Custom Globe Build
|
#5
|
|||
|
|||
Re: Rookie Custom Globe Build
|
#6
|
|||
|
|||
Re: Rookie Custom Globe Build
|
#7
|
|||
|
|||
Re: Rookie Custom Globe Build
Aluminum rear fenders mounted. This globe will be a little old school and a little new school....lol.
These are pre-drilled to mount to the stock Tamiya cross member and have some adjustability regarding the height of the fenders. The fenders look best as low as possible but you will get constant wheel rub so I have mounted mine using the center height mounting position. There are two sets of mounting spacers as shown below; First look with the fenders and the cab. This is still using the king rails but that's about to change; |
#8
|
|||
|
|||
Re: Rookie Custom Globe Build
Front bumper. I do not like the stock front bumper or the front bumper distance from the front wheel. I have purchased two aftermarket bumpers. The first aftermarket bumper was not what I wanted so I ordered the second bumper. The second bumper is much better but I still felt the bumper mounted too far forward so I made my own mount to pull the bumper closer to the chassis;
A look with the bumper as it sits; I have now ordered a 3rd bumper from Steve on this site ( great guy thanks for the help ) and I will see how that bumper looks with the stock mount when it arrives. |
#9
|
|||
|
|||
Re: Rookie Custom Globe Build
The truck now has the correct rails installed. Below is the first mock up of the middle section of the chassis. I will be using the knight hauler side step as kind of a tool box to mount my MFC control box. I will also be adding the aftermarket headache rack. The headache rack mounts to far away from the cab for my liking so I am currently working on modifying the mount to sit closer to the cab. I am also using the aftermarket grates to cover the open space;
Also seen in the photos are the aftermarket stacks which I will be using. |
#10
|
||||
|
||||
Re: Rookie Custom Globe Build
Nice start so far, I'm liking the aftermarket parts
Alfy
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Always Wheeling, Always Dealing ! |
#11
|
||||
|
||||
Re: Rookie Custom Globe Build
good looking globe, going to be sharp when done.
__________________
Shaun legaarden |
#12
|
||||
|
||||
Re: Rookie Custom Globe Build
Ill be watching this one! Good start so far!
__________________
Hi my name is Aaron.... And i'm a truckaholic! |
#13
|
|||
|
|||
Re: Rookie Custom Globe Build
Looks like a great start to me
|
#14
|
|||
|
|||
Re: Rookie Custom Globe Build
Nice truck, excellent choice of parts too.
If I might ask, where did you get the headache rack? |
#15
|
|||
|
|||
Re: Rookie Custom Globe Build
and fenders
|
#16
|
||||
|
||||
Re: Rookie Custom Globe Build
Lookin' sharp so far, you're taking your time.
I'd suggest getting some aftermarket fuel tanks on there. I think a guy at our last East Coast show had some custom long tanks up for sale. Either way, A great build!
__________________
"If you build it, they will come" East Coast Mini Truckers To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#17
|
|||
|
|||
Re: Rookie Custom Globe Build
The rack and fenders came from Ebay. The seller is in China. The rack and fenders cost around $300.00 the quality is very good and the look is very good IMO.
|
#18
|
|||
|
|||
Re: Rookie Custom Globe Build
Quote:
I don't think this truck will get aluminum tanks, I think the next truck will get aluminum tanks. I think the Tamiya plated tanks look more retro than the aluminum tanks. |
#19
|
|||
|
|||
Re: Rookie Custom Globe Build
I have got the headache rack mounted. The rack is made for a king so I had to create a recess to clear the tank mounts.
The body sits a little forward probably due to mu custom bumper mount. Therefore there is an uneven gap between the headache rack and the body. I will see if the 3rd bumper coming will correct this issue. I am happy with the spacing between the rack and the body. |
#20
|
||||
|
||||
Re: Rookie Custom Globe Build
Looking good rookie!! lol very nice globe and i also like the selection of after market parts. I also have that headache rack and love it.!!!
__________________
Grabbin gears and Rollin wheels ! LETS BLOW SMOKE!! Member of the Central Plains Mini Truckers,and a Minnesota road hammer. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Flat bedders do it with chains and straps,but now im yanking 53's To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|