King Hauler driveshaft length?

[avel]

I'm sitting here in my truck wanting to purchase a driveshaft from RC4WD but I don't know which one to get. All I know is I need one that will fit over the 5mm output shaft. I'm thinking the 5.7" - 7" one will work, but I'm not sure.

So anyone know the right one to buy, or the length of the stock driveshaft?

My stock one slips/jams up at times because I took off the "shocks" on my drives for more articulation.

[TRUCKMAKER]

Check out this thread for an inexpensive way of making your own shafts.

http://www.rctruckandconstruction.co...read.php?t=708

You can also adjust the drive cups on the axle and transmission so there is very little fore/aft play in the shaft when all tires are flat on the bench, then see what you get when you flex the suspension and readjust accordingly.

[avel]

yeah i've already read that thread a couple days ago. Pretty cool.

Also good idea with adjusting the cups, I hadn't thought of that.

I mainly want to buy something so when I get hometime I can pop it in, and go play

[Kingcam2]

HI Avel

These are the ones I am using in my King Hauler,

http://www.integy.com/st_prod.html?p...w#.VoJe7hV96Uk

http://www.integy.com/st_prod.html?p...w#.VoJe-RV96Uk

but they are out of stock of them at the moment.

Regards Cam.

[avel]

Thank you very much for that information.

[Sped74]

Thanks for posting about the custom driveshaft they are awesome