RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Truck Building Tech

Truck Building Tech Covers mechanical and electrical components for truck modeling


Reply
 
Thread Tools Display Modes
  #1  
Old 07-25-2016, 02:15 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Question about RC4WD Wheels.

I'm using a Rigid Driven front axle and I bought some of these wheels;


I also bought some of these adapters for the axle;


The adapters replace the part to the right in this photo;


So when you bolt all these parts together how do you get to the actual lug nut on the axle?



If you are thinking I should put the adapter on the axle, tighten the lug nut, then add the hub cover and then the rim and bolt them all together with the 10 face bolts you can see if these wheels were on the axle there is no way you would get to the bolt heads on the backside of the wheel.
Reply With Quote
  #2  
Old 07-25-2016, 02:18 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Maybe I need these wheels, I can see how they go together.



Reply With Quote
  #3  
Old 07-25-2016, 02:26 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

I will have to work at it more when I have more time but I just don't think there is the kind of room to work from the back side of the rim once on the axle and truck.
Reply With Quote
  #4  
Old 07-25-2016, 07:34 PM
Cossett's Avatar
Cossett Cossett is offline
On Leave
 
Join Date: Aug 2010
Location: Sydney Aus
Posts: 1,383
Cossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the rough
Default Re: Question about RC4WD Wheels.

on the red inserts they are threaded of the tiny screw to go in then the rim over and then the nut ,
when I put my ones together I use loctite in the screws / insert let then dry then put the rims on just be careful with the screw you dont over tighten them.

Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11
Love my Kenworths

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old 07-25-2016, 07:59 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

My parts have no threaded holes.
Reply With Quote
  #6  
Old 07-26-2016, 12:46 AM
Cossett's Avatar
Cossett Cossett is offline
On Leave
 
Join Date: Aug 2010
Location: Sydney Aus
Posts: 1,383
Cossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the rough
Default Re: Question about RC4WD Wheels.

My backing hubs did, unless the shop I got them from did it.................

Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11
Love my Kenworths

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 07-26-2016, 05:41 AM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Quote:
Originally Posted by Cossett View Post
My backing hubs did, unless the shop I got them from did it.................

Cheers Tracy

I need to correct myself, the backing plate does have threads as you mentioned but I'm using the adapters for a driven axle, this means the original backing plate is discarded and the adapters are used which have no threads.
Reply With Quote
  #8  
Old 08-01-2016, 08:22 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Well, I have my wheel dilemma figured out. Two set of wheels, one set of adapters and some parts of each used here. Good enough for who it's for.



Reply With Quote
  #9  
Old 08-01-2016, 08:32 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Probably going to do something different with the lug nuts, not really feeling it this way.
Reply With Quote
  #10  
Old 08-04-2016, 05:49 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Changed the lug nuts out for some stainless nylock nuts and added some acorns to the center.


Reply With Quote
  #11  
Old 08-04-2016, 06:24 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Question about RC4WD Wheels.

those look sharp claus
Reply With Quote
  #12  
Old 08-04-2016, 06:25 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Well, it's pretty bad when you can't make up your mind on something so simple but I went back to the RC4WD fake hubs and kept the nylock lug nuts. Just wish those center nuts didn't stick out so far.

Reply With Quote
  #13  
Old 08-04-2016, 06:26 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Quote:
Originally Posted by bigford View Post
those look sharp claus
Thanks mark, I'm never really happy.
Reply With Quote
  #14  
Old 08-04-2016, 08:11 PM
FabOne's Avatar
FabOne FabOne is offline
Journeyman
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 507
FabOne is on a distinguished road
Default Re: Question about RC4WD Wheels.

Claus-
I think they look AWESOME!

-Terry
__________________
FabOne
NW Ohio
Reply With Quote
  #15  
Old 08-05-2016, 01:53 AM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Quote:
Originally Posted by FabOne View Post
Claus-
I think they look AWESOME!

-Terry
Thanks Terry!
Reply With Quote
  #16  
Old 10-08-2016, 02:04 AM
Berman's Avatar
Berman Berman is offline
Newbie
 
Join Date: May 2013
Location: NZ
Posts: 113
Berman is on a distinguished road
Default Re: Question about RC4WD Wheels.

Those acorn nuts would look better without the standard nuts underneath, but I like how you have used regular nylock nuts, goes with the wheel.

I like those wheels, I want the same ones for my reefer (as the tractor has alloys) as they make good looking singles, problem is I need 4x hex and 2x bearing adapters.
__________________
4 tractors/trailers and still no king hauler...
Reply With Quote
  #17  
Old 10-08-2016, 07:19 AM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Question about RC4WD Wheels.

Quote:
Originally Posted by Berman View Post
Those acorn nuts would look better without the standard nuts underneath, but I like how you have used regular nylock nuts, goes with the wheel.

I like those wheels, I want the same ones for my reefer (as the tractor has alloys) as they make good looking singles, problem is I need 4x hex and 2x bearing adapters.
Th studs were too long not to use the standard nuts under the acorn nuts, in the end I put the standard nuts on first, behind the rim. That also moved my wheels out slightly. Which is something I wanted.
Reply With Quote
  #18  
Old 10-08-2016, 01:43 PM
Berman's Avatar
Berman Berman is offline
Newbie
 
Join Date: May 2013
Location: NZ
Posts: 113
Berman is on a distinguished road
Default Re: Question about RC4WD Wheels.

That was going to be my next suggestion but on the other side of the adapter (if there is room) and you wanted the same offset. I had to do this with some of Steve's wheels to run acorns as the bolts I bought were slightly long.
__________________
4 tractors/trailers and still no king hauler...
Reply With Quote
  #19  
Old 11-01-2016, 08:36 AM
markturbo markturbo is offline
Newbie
 
Join Date: Apr 2016
Location: NB, Canada
Posts: 75
markturbo is on a distinguished road
Default Re: Question about RC4WD Wheels.

Thanks for posting this as I've been looking at these as well. Im currently using the Tamiya inner rear wheels as front drive wheels with a TLT front axle. But I'd like to go with a wide front wheel and tire. I wonder if they would work well on the TLT axle.
Reply With Quote
  #20  
Old 11-01-2016, 12:29 PM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Question about RC4WD Wheels.

Quote:
Originally Posted by markturbo View Post
Thanks for posting this as I've been looking at these as well. Im currently using the Tamiya inner rear wheels as front drive wheels with a TLT front axle. But I'd like to go with a wide front wheel and tire. I wonder if they would work well on the TLT axle.
PM sent
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.