|
Anything RC Picture and Video Gallery If you have other Rc's Planes/Buggy's/Crawlers and cool videos you have found and want to share them here is the place. |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Re: The Machinist
You can land that way, But it sure is hard on parts. Been there dun that.
Rob |
#22
|
||||
|
||||
Re: The Machinist
Cool pic! and you are a "pinch" flyer too..good man.
__________________
Scott "No load is too Small" |
#23
|
||||
|
||||
Re: The Machinist
I find I have way more "feel" with pinch control of the gimbals especially since I cut the first joint of my right thumb off (long story) and had it reattached a few years ago and it has limited feeling in the tip.
|
#24
|
||||
|
||||
Re: The Machinist
Well I think I've found the limitations of the Mcpx. It was blowing pretty good today and the poor thing just didn't have the jam to pull out of a low level back flip and I stuffed it hard into the dirt. New frame, links, and blades. Oh well at least parts are cheap
|
#25
|
|||
|
|||
Re: The Machinist
Time start flying your "500"!!! If parts were only as inexpensive as the mCPX.
Albert |
#26
|
|||
|
|||
Re: The Machinist
Not if he is cutting the grass.
|
#27
|
||||
|
||||
Re: The Machinist
Quote:
Now if I could only convince you to bust out the 700 and get it inverted Last edited by TheMachinist; 05-02-2011 at 11:57 PM. Reason: spelling |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|