|
Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Re: New trailer for my truck
WOW great looking truck and trailer!!
__________________
Hi my name is Aaron.... And i'm a truckaholic! |
#22
|
|||
|
|||
Re: New trailer for my truck
Quote:
As far as the curb window goes, I think for the window itself I used a piece from an r/c aircraft window, but any thin piece of clear or tinted window from a toy truck or even the old Lego house windows, they were clear or tinted I think, just pop out the lense and that would work for the glass. The rubber molding is a thin rubber o-ring , the grommet kind that has the groove in it, that I cut to the right length and glued in around window opening in the door. I just used a tiny amount of glue in the groove so none of it squished out on to the outside of the door. Once the glue dried I think I took a razor blade and shaved the part of the o-ring off that protruded to the inside of the door giving me a mostly flat area on the inside. Then I cut a piece of plastic glass a little larger than the opening so no glue would squish into view and glued it flat against door and o-ring. That was 6 years ago but I believe that is how I did it. I had spent many many hours already lengthening hood, cutting the front fenders off and reshaping them, filling in the hood etc. and THEN I think "oh lets put in a curb window". Luckily it went fine, but I would definitely cut the hole first before spending lots of time elsewhere in case it goes wrong and you ruin or crack the cab when cutting hole. I was very nervous cutting a hole in the door after I had spent so much time on the body work as I worried something bad would happen and I would crack the whole cab or ruin something. Thanks again for the compliments! Darwin |
#23
|
|||
|
|||
Re: New trailer for my truck
Thanks! The bottom deck is just .032 aluminum sheet, the top deck has 3 pieces of 1.5" x 1/8" flat bar in the middle, a couple of wood nail strips and the outside railing is made from 1"x 1" angle ripped down to 1/2" for the sides. Darwin
|
#24
|
|||
|
|||
Re: New trailer for my truck
Yes I am considering it as I made jigs and patterns for the pieces so I can replicate it all now, so yes it is something I think I want to do. I think my first plan is to sell the suspension system and see how that goes and then make some trailers. Thanks, Darwin
|
#25
|
||||
|
||||
Re: New trailer for my truck
You done a great job. Looks real good!!
__________________
One is too many and a million is not enough. Fred. |
#26
|
||||
|
||||
Re: New trailer for my truck
really nice build and yea i am liking that flatbed trailer and the suspension
__________________
owner/operator.."got to operate to own" dwayne |
#27
|
||||
|
||||
Re: New trailer for my truck
i know the question was asked and its just an inquiry but were you thinking of selling the suspensions for trailers..just asking because you have a spare one in the picture
__________________
owner/operator.."got to operate to own" dwayne |
#28
|
||||
|
||||
Re: New trailer for my truck
great job and awesome trailer!! you will fit right in here for sure.
__________________
Grabbin gears and Rollin wheels ! LETS BLOW SMOKE!! Member of the Central Plains Mini Truckers,and a Minnesota road hammer. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Flat bedders do it with chains and straps,but now im yanking 53's To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#29
|
|||
|
|||
Re: New trailer for my truck
Well thank you very much , I appreciate that and anywhere there is truck talk and pictures of trucks, I am happy there! Wish there were twice as many weekends in a month so I could have more time to play and peruse the forums!
|
#30
|
|||
|
|||
Re: New trailer for my truck
Awsome I love this unit it is simple and gets it's point across without all the crazy add on's. The trailer is beautifully done well thought out and put together top notch.
TONY |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|