Construction Equipment Radio

[Trackerman]

Originally Posted by apfubar

The majority don't support the scenario above... Spektrum (doesn't)...

Some do, through programming the RX... If you want more info... Probably good to open that can of worms in a new thread.

Ap

My radio is spectrum and it does do it. I have also bound to multiple receivers at the same time.

Paul

[apfubar]

Multiple recievers are supported by Spektrum... In the same model on the tx.

Mapping a control/surface to an output channel(or two) is also supported by spektrum in the same model on the tx.

Mapping throttle to channel 1 in reciever 1, and swing(rudder) to channel 1 on reciever 2 in the same model on the tx is not supported by Spektrum, some others can do this... But you only need it in very specific circumstances...