Rear Bumpers

[RCP57]

Originally Posted by Mustang46555

Hang on to one for me! The L9000 box confirmation is only a week or so away!!!!!!

No problem Dennis. I made some more today!

[RCP57]

I got these back from coating today and they are selling quickly.

[RCP57]

Originally Posted by RCP57

I got these back from coating today and they are selling quickly.

I'm getting some more of these done this coming week if anyone else is interested.

I also just setup this one with a Garden Trucking pintle hitch. The hitch comes setup with the chains installed on the truck side so I made up some rings on the bumper to change it around to the correct setup. I also drilled two sets of mounting holes with a 4mm offset to adjust the height if necessary. I'm not sure if it's visible in the photos but the hook on the left is much larger than the one on the right. Not sure what happened there

[skeeter]

In the pics above, where the small jam nut is, on the pintle eyelet, can you custom make one that would be 5 inches long, from that nut? I need a compensator for a PNW stylr logging truck I will be building this winter. I think.......................there I go thinking again...............IF I did math right (NOT good at math) 5 inches, in 1/14 scale should equal 9 feet of real life?

[skeeter]

I ONLY need/want the farthest away from the eye, the last quarte of an inch threaded. The rest would need to be smooth.

[RCP57]

Originally Posted by skeeter

I ONLY need/want the farthest away from the eye, the last quarte of an inch threaded. The rest would need to be smooth.

I didn't make the pintle hitch. It is from Garden Trucking(Precision Model Distributors).

[Claus]

Now you're talking Reg!!! Sign me up!

[RCP57]

Originally Posted by Claus

Now you're talking Reg!!! Sign me up!

OK! I will drop it off to be coated on Tuesday(black right?). It's a holiday here tomorrow for the privileged people that have Monday to Friday type jobs. Hopefully I will have it back before the end of the week.

[Claus]

Yes Sir, gloss black. No hurry. Thank you.

[RCP57]

Are you sure you want gloss? All the rest are velvet black(semi gloss) and that matches stock frame rails very well.

[Claus]

OK, you know what you're doing, make it semi gloss!

[RCP57]

Originally Posted by Claus

OK, you know what you're doing, make it semi gloss!

Let's not get silly with the compliments.lol

[frizzen]

Originally Posted by skeeter

In the pics above, where the small jam nut is, on the pintle eyelet, can you custom make one that would be 5 inches long, from that nut? I need a compensator for a PNW stylr logging truck I will be building this winter. I think.......................there I go thinking again...............IF I did math right (NOT good at math) 5 inches, in 1/14 scale should equal 9 feet of real life?

Depending on the thread of the pintle why not try some aluminum rods like rock crawlers use for links?

5" in 1/14 is 5.8 feet.
7.714" in 1/14 is 9 feet or 195mm

http://www.axialracing.com/products/ax30518 so if the lunette ring uses m3 x.5 then 2 of these would work, and get a m3 setscrew to connect them for 196mm.

[RCP57]

The next batch of bumpers are ready to ship....



Custom order with PMD Pintle hook



Reg

[Claus]

Looks great! My Peterbilt will be happy.

[Claus]

I carried the backing plates over from my PMD hangers and the mudflaps are from ExClusive RC, it all fits together perfect. I'm very happy Reg!

[RCP57]

Wow that arrived quickly and looks great Craig! Thanks for posting the pics!

[Northern Farmer]

Nice