RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #381  
Old 04-06-2011, 01:38 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by td9clyde View Post
nice work on the point sounds like your having cable problems like me i can't find anything that isn't stiff like the 7 twist galvanized in 1/16th and thats kinda what i need just not so stiff..........keep up the awsome work
Use the .038'' 7x19 . 1/16 sounds out of scale for the Terex. It probably had 1/2 or 5/8'' originally. I have some and it's very flexible. Check McMaster Carr $1.69/ft.
Reply With Quote
  #382  
Old 04-06-2011, 01:42 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Be sure and call Mcmaster and make sure its a continous roll you're buying. Seems like everytime I buy stuff from them its from a diff company and slightly diff stuff.
__________________
Jeff
Reply With Quote
  #383  
Old 04-06-2011, 01:48 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by pugs View Post
Be sure and call Mcmaster and make sure its a continous roll you're buying. Seems like everytime I buy stuff from them its from a diff company and slightly diff stuff.
You know I was thinking that too. If I could buy from a manufacturer I could be assured. The sling outfit tried 3 places for me and resulted the dreaded minimum qty. well I'd buy more if the price per foot would be lower.
Reply With Quote
  #384  
Old 04-06-2011, 02:01 PM
td9clyde td9clyde is offline
Dozer Builder
 
Join Date: Aug 2010
Location: Keystone, IN
Posts: 728
td9clyde will become famous soon enoughtd9clyde will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by 9W Monighan View Post
Use the .038'' 7x19 . 1/16 sounds out of scale for the Terex. It probably had 1/2 or 5/8'' originally. I have some and it's very flexible. Check McMaster Carr $1.69/ft.
lol i would but i don't really know the size yea the real cable is 5/8 i need to look at some in person i guess is what i am tryin to say lol
__________________
I built this thing and have it working now what do I do with it?
Reply With Quote
  #385  
Old 04-06-2011, 02:57 PM
eef7260's Avatar
eef7260 eef7260 is offline
Newbie
 
Join Date: Mar 2011
Posts: 27
eef7260 is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Hi Steve

Did you try sailing boat shops , i was lucky there.
They use all sort of sizes , and small ones too for on those small 1 person sail boats.
Over here they even sell 1 mm ( i think thats something like 5/128 ) stainless steel.
And from there the sizes go up.
And it's very flexible as well because it has many small wires.
Give google a try for your area
here is an example http://www.westmarine.com/webapp/wcs...classNum=10244

Eef

Last edited by eef7260; 04-06-2011 at 03:04 PM.
Reply With Quote
  #386  
Old 04-06-2011, 03:08 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by eef7260 View Post
Hi Steve

Did you try sailing boat shops , i was lucky there.
They use all sort of sizes , and small ones too for on those small 1 person sail boats.
Over here they even sell 1 mm ( i think thats something like 5/128 ) stainless steel.
And from there the sizes go up.
And it's very flexible as well because it has many small wires.
Give google a try for your area
here is an example http://www.westmarine.com/webapp/wcs...classNum=10244

Eef

Pugs just sent me this outfit.http://www.savacable.com/pages/prod_01_00.html
I'm waiting for a call back. I see a 3/64'' 7x49 That would be really flexible.
Reply With Quote
  #387  
Old 04-06-2011, 03:15 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Yeah and they have a 250' min on stock sizes and a $150. min order, which is less than the mcmaster. Plus they have fittings and thimbles too.
__________________
Jeff
Reply With Quote
  #388  
Old 04-06-2011, 03:25 PM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Steve-thanks for the explanation. I guess there is a way to do anything if you have the correct tools. I sometimes forget how big your model is and that makes a difference. On my little truck a 4-40 screw hole is a big hole.
Reply With Quote
  #389  
Old 04-07-2011, 12:00 AM
grumpygrady grumpygrady is offline
Green Horn
 
Join Date: Aug 2010
Location: florida
Posts: 263
grumpygrady is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

if you will check with your local beading store they have what you need
it will come in 7 ,21 or 28,49 strand beading wire was called foxtail a long time ago
or check fire mountain gems on the net one roll is 60 yards and around $20
they have it in colours and stainless and silver or gold if you have the money
even have it in nylon

or rio grande or any jewelry supply store

if you need i will post web address's tomorrow for it
Reply With Quote
  #390  
Old 04-07-2011, 07:52 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Thanks Grumpygrady, I googled it and found it. Looks like it only comes coated and max dia. of .024'' That would be too small for my application. There's a Michael's craft store about 3/4mile away from me. I'll get some anyway if they have it, and see what it looks like.
Reply With Quote
  #391  
Old 04-11-2011, 09:10 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Well, It looks like buying from McMaster Carr is cheaper than buying from their supplier (Sava Cable). I was quoted $150min order(no problem with my required footage) $1.08/ft for 250ft of 7x19 and $2.59/ft for some really flexible 7x49. That stuff would be real nice on smaller models.
McMaster is around $.87/ft for the 7x19
Reply With Quote
  #392  
Old 04-11-2011, 12:05 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Wow, was worth a try anyway.
__________________
Jeff
Reply With Quote
  #393  
Old 04-11-2011, 02:07 PM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Will the 7x19 (is that 7parts with 19 treads in each, or 7mm with 19 treads) have shorter life lenght than 7x49??
Guess it depends on minimum radie that the cable can be run with,
Dan
Reply With Quote
  #394  
Old 04-11-2011, 02:21 PM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

This link has an end view that explains this.

http://www1.mscdirect.com/eCommerce/...rchandizedOk=Y
Reply With Quote
  #395  
Old 04-11-2011, 11:14 PM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 698
sparkycuda is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Here's another source to try for the cable. They have a variety of sizes and configurations - 3/64" 7X19 is just one of the choices. The catalog I have is about 3 years old, so you'd have to check for current prices.
Precision Scale Model Engineering, [URL="http://www.psmescale.com"][EMAIL="psme@psmescale.com"], phone 508-478-3148.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #396  
Old 04-14-2011, 04:52 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Thanks Ken for the link. I didn't see any products though. Do you have to order their catalog to see what they offer?
Reply With Quote
  #397  
Old 04-14-2011, 05:14 PM
steamer's Avatar
steamer steamer is offline
Journeyman
 
Join Date: Aug 2010
Location: Comox,Vancouver Island B.C.
Posts: 552
steamer will become famous soon enoughsteamer will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Steve. I don't know if anyone mentioned this, but you can get very small cable from any of the overhead garage door people. I got some from a guy here and it was 1/8" dia SS and very flexible.
Rob
Reply With Quote
  #398  
Old 04-14-2011, 05:20 PM
steamer's Avatar
steamer steamer is offline
Journeyman
 
Join Date: Aug 2010
Location: Comox,Vancouver Island B.C.
Posts: 552
steamer will become famous soon enoughsteamer will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

There's also the cable here, it's .017 SS Dia.
http://store.rc4wd.com/Bulldog-Repla...ne_p_1168.html
It may be available in longer lengths.
Rob
Reply With Quote
  #399  
Old 04-14-2011, 10:56 PM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 698
sparkycuda is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

I think the only way to see the product is in the manual; however, I've called and emailed questions and always had good response. Perhaps if you contacted them, they could furnish pictures or info. The book does not really have a picture of the cable - a size and type chart and explanation diagrams to show what a 7X19 designation means, for example. It is not a hi-tech book, mostly B&W images of products, but a section of color/slick info on small power tools, machining equipment, etc.

They do have supplies, material and tools I've not seen elsewhere.

Hope that helps a bit.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #400  
Old 04-20-2011, 09:14 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Well after the big computer crash last week I'm back running but big problems with my Cad Cam program working with Windows 7. Luckily I still have all my files and thousands of pictures from the old hard drive still there. I have it fixed partially and will be looking for another old computer with XP or Vista. to run just the BobCad stuff. I also found out my old Autocad 2000LT won't work either. Now I have to buy a new version for 2012
I would have had some more done on the A frame if I wasn't occupied with these computers.
Today I ordered 100' of 3/64'' cable off ebay but not enough for all the suspension ropes to try on the boom. I want to try to get it ready by May 8th for the Lakeside Sand and Gravel show and then May 20-22 Brownsville,PA.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.