|
Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
|
Thread Tools | Display Modes |
#41
|
||||
|
||||
Re: Perry's Leimbach Build
Did some work running hydraulic lines today. I removed the valve block to move it back as Joe suggested. Also to relocate the aux. valve. I was not succesfull in removing the hoses from the valve block without damaging the hoses. I hope I have enough hose to finish the machine. I had to order some drills and taps to complete the valve block move as well.
Joe do you run two battery Packs or a modified battery pack. Perry Last edited by Texasperry; 09-20-2010 at 12:34 PM. Reason: Added for clarity |
#42
|
||||
|
||||
Re: Perry's Leimbach Build
I use two seperate 2700mAh AA packs, laying on their side - stacked up. The batt that runs the pump is always on top b/c I'll change that one 3 or 4 times to the other one that runs the rest of the model electrics.
You can't remove the hoses from the barb fitting, trim the hose with a sharp blade as close to the fitting as possible, if you ever need to remove. Then you'll have to cut the rubber hose that remains on the fitting. |
#43
|
||||
|
||||
Re: Perry's Leimbach Build
Thanks Joe, I discovered that I can not remove the hose. I had to do exactly as you mentioned.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|