RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #81  
Old 06-24-2012, 11:42 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: Volvo G990 Grader

I see problem's with the quality of there sand, I see gas problem's, and I don't think they understand how to vent the mold properly! They need to pay attention to what temperature they pour at.
Yes, I understand your frustration!

Cheer's, Neil.
Reply With Quote
  #82  
Old 06-30-2012, 07:55 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

I´ve found another foundry to entrust with the next, much beefier part(s). Hope they´ll do better.

In the meantime I´ve started making cylinders. They come in two rather small sizes, namely 10 and 13 mm inside dia., respectively.

This is my CAD drawing of the the circle turn cylinder. The piston rod is a mere 4 mm in diameter, even in 1/8. The cylinder piston is the 10 mm one. The stroke is 39 mm.


This is, obviously , the real one:


The tubes here are just pre-cut.




The cylinder heads are at a 14.4 and 17.4 mm outside diameter, respectively.


Stefan

Last edited by Stefan; 11-06-2017 at 12:42 PM. Reason: Link repair
Reply With Quote
  #83  
Old 06-30-2012, 08:01 AM
Madda Madda is offline
Newbie
 
Join Date: Nov 2011
Posts: 120
Madda is an unknown quantity at this point
Default Re: Volvo G990 Grader

What is that green part next to the O-ring in your Cad drawing?

Great build, always gives me so much ideas and inspiraion! Keep posting!
Reply With Quote
  #84  
Old 06-30-2012, 09:29 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Thanks Madda! The green part is supposed to symbolize a wiper and support for the O-ring.

Stefan
Reply With Quote
  #85  
Old 06-30-2012, 09:49 AM
JAMMER JAMMER is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Liverpool New York
Posts: 1,346
JAMMER is on a distinguished road
Default Re: Volvo G990 Grader

That is some very nice machining on those caps, Ed
Reply With Quote
  #86  
Old 06-30-2012, 10:29 AM
Madda Madda is offline
Newbie
 
Join Date: Nov 2011
Posts: 120
Madda is an unknown quantity at this point
Default Re: Volvo G990 Grader

Wiper, okay, what is the material you use to make this?
Reply With Quote
  #87  
Old 06-30-2012, 11:53 AM
tc1cat's Avatar
tc1cat tc1cat is offline
Super Moderator
 
Join Date: Aug 2010
Location: Northern Indiana
Posts: 1,318
tc1cat is on a distinguished road
Default Re: Volvo G990 Grader

That is some outstanding machining!! What are you using to be able to thread that close to the bottom of the caps??
__________________
LYNN
Reply With Quote
  #88  
Old 06-30-2012, 12:38 PM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Thanks! Well, I too thought that would be a problem, but luckily I found out there are tools like this:


Last edited by Stefan; 11-06-2017 at 12:44 PM. Reason: Link repair
Reply With Quote
  #89  
Old 06-30-2012, 12:54 PM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Quote:
Originally Posted by Madda View Post
Wiper, okay, what is the material you use to make this?
For the wiper I expect some experimentation to be necessary (since plastic kind of yields to the cutting tool). I´ll start with PTFE and hope that I can somehow produce a working wiping lip.
Reply With Quote
  #90  
Old 06-30-2012, 07:01 PM
Trackerman Trackerman is offline
Newbie
 
Join Date: Sep 2011
Posts: 46
Trackerman is on a distinguished road
Smile Re: Volvo G990 Grader

Stefan,
when you make up the wipers for the cylinders can you provide photos and description of how you make them as well as what material you use apart from the PTFE please. Learning a lot from builds like yours and appreciate any detailed information that helps to make the parts in the home workshop.

Cheers

Paul
Reply With Quote
  #91  
Old 07-01-2012, 01:39 PM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Paul,
Sure! When I know what works I´ll show you.

Stefan
Reply With Quote
  #92  
Old 07-01-2012, 01:48 PM
ihbuilder's Avatar
ihbuilder ihbuilder is offline
Fabrication and design , super moderator
 
Join Date: Aug 2010
Location: in a cage in Auburn,PA
Posts: 3,557
ihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the roughihbuilder is a jewel in the rough
Default Re: Volvo G990 Grader

OK , now where did you find that id threading bar ? been looking forever OTOH , the grader is coming along nicely
__________________
RIP FreddyGearDrive 2-12-59/12-19-11

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #93  
Old 07-01-2012, 02:16 PM
dabears's Avatar
dabears dabears is offline
Dairyland trucker's right hand man.
 
Join Date: Mar 2012
Location: Chicago, IL
Posts: 2,005
dabears is on a distinguished road
Default Re: Volvo G990 Grader

Your cylinders are off to a great start!! You have some major talent with those machines
__________________
Hi my name is Aaron.... And i'm a truckaholic!
Reply With Quote
  #94  
Old 07-02-2012, 01:10 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

@Steve: The threading bar is a SIR S16x07 M08 from AKKO. Needs a minimum 11 mm id hole. They also sell on eBay (Germany). The insert is a 08 IR 0,5 ISO BMA from www.bachgmbh.de.

Another german supplier (they don't seem to have any englich page, am sorry) sell threading bars for holes down to 6.2 mm (1/4").

Stefan
Reply With Quote
  #95  
Old 07-03-2012, 06:11 AM
Trackerman Trackerman is offline
Newbie
 
Join Date: Sep 2011
Posts: 46
Trackerman is on a distinguished road
Default Re: Volvo G990 Grader

Stefan,
thankyou for the reply I look forward to following the rest of your build.

Cheers

Paul
Reply With Quote
  #96  
Old 07-03-2012, 11:22 AM
Espeefan's Avatar
Espeefan Espeefan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Wisconsin
Posts: 2,888
Espeefan has a spectacular aura aboutEspeefan has a spectacular aura aboutEspeefan has a spectacular aura about
Default Re: Volvo G990 Grader

Wow, the attention to detail! Incredible. You are very talented. It's just amazing to me, to see this project, and others like it, come together.
__________________
Nathan
Reply With Quote
  #97  
Old 07-07-2012, 06:24 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Thanks Nathan! Despite all intentions to plan well ahead I run out of brass for the cylinders build and have to put it on hold for a while. But thanks to that I had time to prepare some pics from the circle build.

The basis is this 210 mm (over the tips) toothed wheel, which was laser cut from 6 mm (1/4") stainless. Here with an MDF fixture for centering the ring (see further down).





Here you see the shaping of said ring from a 4 mm x 19 mm bar in a simple bending device. If you wonder what the black dots at the edge are, here´s the story: As I milled away 1 mm along the edge from a 4x20 bar I must have released some surface tension having the effect of bending the whole bar in its main plane, the milled surface being convex by about 2 mm in the middle portion . Trying to straight that out in the vice in a controlled way I imagined to be rather frustrating if not infeasible , but I remembered that there´s always this problem with contraction with welding. So I made all these welding spots with the TIG, starting sparsely and adding more until the bar was back to straight. I´ll tell you it was a good feeling turning that problem to my advantage and watching the bar returning to straight almost effortlessly.




Due to the elasticity (you see the spring back two pics above) the bending core is this small and makes an overlap necessary. I reckoned a coiling overlap to be less detrimental to the end result than a layer on layer kind of winding. In any case, it allowed the forming wheel (the ball bearings) to be closer to the core.


The ends stay straight or become bent with the wrong radius, so have to be cut away.


Attaching the ring to the cog wheel.


Then the bearing surface was ground.




The resulting surface compared to the raw laser cut to the right.



The edge if the ring is internally reinforced by this narrower ring.






Thanks for looking.

Stefan

Last edited by Stefan; 11-06-2017 at 12:53 PM. Reason: Link repair
Reply With Quote
  #98  
Old 07-07-2012, 10:13 AM
Finster's Avatar
Finster Finster is offline
Apprentice
 
Join Date: Sep 2010
Location: NY, USA
Posts: 401
Finster is on a distinguished road
Default Re: Volvo G990 Grader

WOW! Just wow! Amazing work on your models, I really wish I had your talent. I love the wooden bending jig too.
__________________
Brian
Finster shavin' and smokin' a cigar?!?!
Reply With Quote
  #99  
Old 07-15-2012, 05:40 AM
Stefan Stefan is offline
Green Horn
 
Join Date: Dec 2011
Location: Near Munich, Germany
Posts: 157
Stefan is on a distinguished road
Default Re: Volvo G990 Grader

Glad you like it, Brian . The fork portion of the circle is now ready. Final fixing to the gear and ring portion to follow when I have tested the circle turning drive.









Stefan

Last edited by Stefan; 11-06-2017 at 12:57 PM. Reason: Link repair
Reply With Quote
  #100  
Old 07-15-2012, 08:22 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,285
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: Volvo G990 Grader

Pretty tricky work cutting that ring to fit inside of the circle. I do that alot at my work on some of the products we build.
Reply With Quote
Reply

Tags
1:8, grader, volvo


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.