1/25 6 Axle Lattice Crane

[Southgate]

I've been working away at it here, getting well under way on painting the crane. These pictures are basically mock ups, but you can get the over all idea. The 2nd color will be gray, as the front grill, and the one on the upper unit. It's as shiny as a new die cast model. That will be dealt with too.



The grill on the hood will be gray too.

[catmack]

Southgate, this is fine work. I like the detail on the exhaust. Colin

[kerst]

Looks great!

kerst

[Espeefan]

Very nice, Dan. Keep going!

[Southgate]

Here are the latest pictures of progress. The cabs are painted, along with a few other items.


Lights are working like they're supposed to. The lenses are now added over the LED, and are flush with the body panels, giving the light a wider angle.


I finally got some pictures of how the lights pretty much look...Headlights on


Headlights off


These lights appear more red in person, but this is still the best picture I have of the tail lights so far.



I'm taking this to a model car show in Portland (OR) today. It should behave itself, as everything is working like it's supposed to. We'll see! Dan

[scalelover]

A bit off topic here, but how large is the train layout that we can see in the background of the pics? Also what scale is it? I dabble in N scale trains as well and it's always cool to see other stuff that rc fans are doing

--Dan

[Southgate]

Fair enough question, considering the train layout is in most of the crane pictures. It is HO scale, and runs all the way around the room when I put the duckunder across the doorway. The room is about 10x20 feet. The workbenches are under the layout.

Looking at the crane sitting on layout deck;


And below the layout:


I had been working slowly on the RR layout for a few years, but progress halted when I started on the crane 6 years ago, something I've wanted to build since I was about 20. The RR is supposed to be mid 60s on the Oregon coast (where I grew up) Southern Pacific. The layout is in operating condition, but no scenery, obviously. Progress will resume when I fairly complete the distraction at hand. I only model in 1/24-1/25 and 1/87
Thank You for asking. Dan. (other Dan)

PS. I just got home from work where I used their heated space to paint some more on the crane. Most all the styrene bodywork is now painted. I suffered casualties on the earlier painting session. For some unknown reason, some of the LEDs failed in the tail light section. I'm stumped as to why, but I tore 'em all out (it wasn't a pretty picture, I was REALLY mad!)and will wire in new ones asap.

[Lil Giants]

What a great use of space!!! I never noticed your workbench under there in earlier pics... I'm bad for tunnel vision.

And you have your dog house in the mix of things too Dan, more quiet time from the wife.

[kerst]

My bedroom used to look like that, mostly workshop with a bed in the corner.
Till I got to know my wife! Ha, ha!
Now I have a corner in the wood shop, which is great, because it far enough away from the house.
Nice toolbox you have sitting there on that chest of drawers!

Kerst

[Espeefan]

Ahh, living the dream! I have always been interested in model railroading and trains, ever since I can remember. I'd love to have a room like that, to build something. Maybe someday! There aren't to many hobbies, greater then model railroading and radio controls trucks/construction equipment. At least not in my opinion! Good to meet another fan of the Espee. Oregon is some beautiful country. I'd like to visit it someday. I can't think of a finer setting for a Southern Pacific layout. Good choice!

LEDs not working - all I can think of is maybe you got some paint somewhere it wasn't supposed to go and it bridged an electrical connection, shorting out some of the LEDs. Most paints do conduct electricity.

[Southgate]

The "dream" room was something I salvaged. It was 10x12, with one open end. I salvaged it and enough material from the same demolition to add 8 feet on to it. The only money I had to spend was for lights and sheetrock. Later I put in the laminate floor.

When I was young, in Coos Bay Oregon, you could still walk around up close to the trains on the tracks and look around. Trains no longer run to Coos Bay, the bridge is delapidated. I live in Bend now, east of the mountains.

As for the crane, the new LEDs will be installed into prepainted boxes on the rear section.
Dan

[dabears]

Amazing work!!! Looks like the crane is getting near being done!! Any videos of it yet or did i miss them?

[Southgate]

Nope, no videos yet. But i have a buddy who's going to help me get some on You tube when it is at least presentable. A link will be posted when ready.I got the cabs and more body work painted last night. Still have way to go; Counterweights, chassis, upper machinery. Outriggers are not near ready for paint. plus fixing the lights. More pictures as progress is made.

[kerst]

Looks great!

Kerst

[Southgate 1]

I haven't been logged in here in a while. I guess I changed my password some time, and I've tried every alternative as well. I had to reregister under a new slightly changed name.

I did figure out how to do a simple video, here's a look at some of the action. Kinda crude, it's all I have.

first ever video, before paint. couldn't load it with old 'puter. Dan

[Lil Giants]

Looking good Dan.

I changed your password for Southgate & PM'd the password to your Southgate 1 account.

[9W Monighan]

That slews very nicely. Great job.

[mcCracken15]

You know how good it feels to know someone else live right here in Oregon for a change! I felt like I was the only one! I would love to start hearing about some model shows in portland . It is a 4 hr. Drive for me but would be way worth it. I've been hard at work building ab1/14 excavator and starting on a 1/14 d11 for my brother. I just bought a lathe and mill last year and have learned so much its amazing and I really don't know how I've lived without!

[Southgate]

Hey, McCracken, wherebouts in OR are ya? The show I go to about every other year is a model car show, the SABA puts it on. It's not an RC show, but I build 1/25 trucks and cars, and this crane...

I have taken about a couple years off on doing anything with this project other than operate it, but I got busy lately. I tried a 10 lb lift to see what would happen. It revealed some weak points, but did the lift without any damage.

One weak point was the slewing pivot, rather a hub and spindle affair. The spindle was fine, a 1/2 stainless steel bar. There was enough play in the hub part, basically brass tube inserted through the 1 1/4" thick base plate to allow fore and aft rock, thus some interference. It took 10 lbs to reveal that.




So a new hub was turned from thick brass bar and a larger hole drilled to accept it. It is stepped so it looks like it's sitting on top, but it goes all the way down through, and held in with a set screw.


I rebuilt this block too. It needed a stronger hook, so I made a copper one. I'll probably replace it later on with a double hook, but for now this holds with all authority. The thin plates between the sheaves were warped, so I made thicker ones, now the block behaves far more smoothly. That overhaul took most of the day!


Another 10 lb "pick" was done to check out the improvements, and it all works quite nicely.

[Southgate]

Here's a little video of the crane raising the boom, gantry and live mast. Clicking on the little x-in-the-box should open it.