|
Military Vehicles. Trucks/Support Vehicles in here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
The trailer I designed on 2d autocad, basically I measured the length of the tank and made the trailer to suit. The tank weighs around 8kg, so the trailer needed to be fairly strong.
My idea was to make to spines the full length of the trailer and bolt it altogether with cross members and outriggers. I made the spines from 4 pieces of 1mm sheet steel and sandwiched perspex between each pair. After making wooden templates and cutting out the steel, this is what I ended up with. The next fun part was cutting them out. |
#2
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
After much cutting I made a bracket from steel which would space the spines apart at the front and also double up as the coupling pin mount. I sourced a trailer for donor parts, mainly for the suspension, but also for body work to make the bed for the UC6 truck. The trailer came from Cross-rc.
Once I built the suspension I bolted the spines to it and hooked it up to the truck for a test fit. |
#3
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
|
#4
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
|
#5
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
|
#6
|
|||
|
|||
Re: Cross-RC UC6 tank hauler
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|