Bruder 574 RC conversion weekend project!

[Zabco]

Please don't take your machine apart just for my sake. I have disassembled the cab on mine and yes there is some nice room between the top of the cab roof and the inside ceiling. My concern was running wires up into that space from inside the cab. I was hoping for some way too keep them hidden but given the openness of the cab and that it is only one piece I don't see anyway to keep wires completely hidden. Fortunately I have some pretty small two conductor cable with a white jacket that I think can be run up the right hand side and will not be too obvious.

[TheBennyB]

Could just use some white shrink tube as a conduit. Maybe just tack it in on top and bottom with shoe goop to hold in place.

[Zabco]

I ended up using the white jacketed cable I had. Given the small diameter of the cable and the tinted windows it really isn't noticeable. The cable is so stiff and it is right against the right side of the cab that I didn't have to use any adhesive to keep it in place.

[edge]

One of the best Bruder front loader builds I've seen on the web so far!
Like your steering approach a lot.
Tnxs a lot for all provided information, including iges file.
Immediately started to buy some components last night