RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #401  
Old 04-20-2011, 09:29 AM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Sorry to hear that your system went down. As for getting a copy of 2012, don't bother, it has many problems with compatiablity. If you can find AutoCad 2009, that would be the one to use. It is the most stable since 2008 release.
Autocad 2000 full version dosen't require a key code and can be loaded onto any xp or win 7 64bit computer. You just have to make sure that your Win 7 installation can run 64 and 32 bit programs.

I will try to locate you a copy of the Acad 2000 version if you want.

Carl
Reply With Quote
  #402  
Old 04-20-2011, 09:46 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by Car5858 View Post
Sorry to hear that your system went down. As for getting a copy of 2012, don't bother, it has many problems with compatiablity. If you can find AutoCad 2009, that would be the one to use. It is the most stable since 2008 release.
Autocad 2000 full version dosen't require a key code and can be loaded onto any xp or win 7 64bit computer. You just have to make sure that your Win 7 installation can run 64 and 32 bit programs.

I will try to locate you a copy of the Acad 2000 version if you want.

Carl
Thanks Carl,
I tried the 2000LT but it wouldn't load because of the 32bit vs 64bit.
I don't know how to operate Autocad very well but now I'm forced to learn. I downloaded a demo of 2012LT and It is working slow but I guess that's because it's running through the internet. It's really hard for me to learn how to do any new things these days. I guess my brain is working without enough Ram
Reply With Quote
  #403  
Old 04-20-2011, 11:07 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Thank's for posting the Lakeside open house. I met Larry last month in Vegas,
"He's a wonderful guy to know"! Met him at the HCEA Both.
Later, Neil#2 aka doodlebug.
Reply With Quote
  #404  
Old 04-21-2011, 09:46 AM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by 9W Monighan View Post
I guess my brain is working without enough Ram
Confusion is my default setting

I stopped by the post office this morning, you should have it by Wednesday.
Reply With Quote
  #405  
Old 04-25-2011, 10:04 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Well I managed to get some done this weekend on some of the suspension rope sheaves. I still need to make some brackets that'll get attached to the boom chords that will hold the small shackles I made up.
Steps for making a shackle:
Turn a 3/8'' sq.

Mill inside flat





Bend


Mill ends round


Finished parts

Reply With Quote
  #406  
Old 04-25-2011, 10:37 PM
TheMachinist's Avatar
TheMachinist TheMachinist is offline
Newbie
 
Join Date: Nov 2010
Location: Port Alberni
Posts: 149
TheMachinist is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

No detail left untouched
You are without a doubt one of the best craftsmen I've seen work with metal.

Jordy
Reply With Quote
  #407  
Old 04-26-2011, 07:09 AM
Brian in PA's Avatar
Brian in PA Brian in PA is offline
I'd rather be truckin'
 
Join Date: Aug 2010
Location: Avella PA
Posts: 1,320
Brian in PA will become famous soon enoughBrian in PA will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Truly amazing work Steve!!

Brian
Reply With Quote
  #408  
Old 04-26-2011, 08:49 AM
SmallHaul's Avatar
SmallHaul SmallHaul is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Eastern, PA
Posts: 1,113
SmallHaul will become famous soon enoughSmallHaul will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Nice work Steve. That is amazing that you could make that piece out of a solid piece of 3/8 stock and bend it centered so that the ends line up! Very nice looking parts too!
__________________
Scott

"No load is too Small"
Reply With Quote
  #409  
Old 04-26-2011, 08:50 AM
tc1cat's Avatar
tc1cat tc1cat is offline
Super Moderator
 
Join Date: Aug 2010
Location: Northern Indiana
Posts: 1,318
tc1cat is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Now that is just showing off I have got to see this in person
Steve, are you going to try and make the NAMES show in Detroit this weekend????
__________________
LYNN
Reply With Quote
  #410  
Old 04-26-2011, 09:03 AM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Nice demo on making the shackles Steve.
Reply With Quote
  #411  
Old 04-26-2011, 11:42 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

I do alot of metal bending in my regular job. I could have made them a little nicer if I took the time to make a better jig rather than using a flat bar with a 1/8'' drill bit to get the radius started and then press them into a die Funny thing, when I got to the bottom of the pile of sheaves I discovered 3 that had a smaller bore. These were supposed to be used on the three shackles. I made the OD to match the larger bores I need to go back and mill the ends down smaller. I wondered why they looked so big Man the eye sight is really needed to blend the ends to make them look like a forged piece with the Dremel tool.
I hate stopping on something and forgetting what I was doing a month prior
Reply With Quote
  #412  
Old 04-26-2011, 11:50 AM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

I forget where I am on a project also at times. Lately I have started writing myself reminder notes. is normally my defult setting.
Reply With Quote
  #413  
Old 04-26-2011, 04:12 PM
D8R D8R is offline
Apprentice
 
Join Date: Sep 2010
Location: Ronninge, south of Stockholm, Sweden
Posts: 425
D8R is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

wow, had never been able to duplicate that work, Steve.
Still hope to see that machine in real. Nice drawings to!
Dan
Reply With Quote
  #414  
Old 05-01-2011, 08:51 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Finally I got the safety rope brackets made and fastened to the boom. I hope to raise the boom this week with the new $180 worth of wire rope I bought.







Those Lego tires seem to be the correct scale so I'll wire them on the top.
Reply With Quote
  #415  
Old 05-01-2011, 09:27 PM
Car5858's Avatar
Car5858 Car5858 is offline
Green Horn
 
Join Date: Mar 2011
Location: Hammond In
Posts: 298
Car5858 will become famous soon enoughCar5858 will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Nice progress Steve
Reply With Quote
  #416  
Old 05-01-2011, 10:13 PM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

http://www.harborfreight.com/catalog...q=soda+blaster
Hey Steve does this help answer the previous question on soda blasting?
Later, Neil#2 aka doodlebug.
Reply With Quote
  #417  
Old 05-01-2011, 11:28 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by doodlebug View Post
http://www.harborfreight.com/catalog...q=soda+blaster
Hey Steve does this help answer the previous question on soda blasting?
Later, Neil#2 aka doodlebug.
I looked those over. There's a Harbor Freight 1 mile up the street from my shop. I may get one sometime soon. I definitely need to clean the boom of all the acid from the solder flux. I noticed the steel socket head cap screws were rusting some after sitting a couple months.
Reply With Quote
  #418  
Old 05-03-2011, 05:54 PM
dirtpusher9's Avatar
dirtpusher9 dirtpusher9 is offline
Moderator
 
Join Date: Aug 2010
Location: Texas
Posts: 457
dirtpusher9 has a spectacular aura aboutdirtpusher9 has a spectacular aura about
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Wow Steve, the shackles and sheaves are amazing. The boom is huge and very realistic looking. Nice work as usual. Ready to see it working, in person, that is.
__________________
Joe
Reply With Quote
  #419  
Old 05-04-2011, 09:23 PM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

Quote:
Originally Posted by dirtpusher9 View Post
Wow Steve, the shackles and sheaves are amazing. The boom is huge and very realistic looking. Nice work as usual. Ready to see it working, in person, that is.
Thanks Joe, The shiny black shackles are from RC4x4 they are really nice.


Here is another big milestone in this build! I took the time this evening to reeve all the wire ropes that hold the boom. I need to design some miniature Crosby Clamps instead of using the copper sleeves.
I need to make a tool to smash them better than the wire terminal pliers I'm using.

Next step is to get the boom hoist winch installed and see if it has enough power to lift the boom off the ground. While pulling it up with my hand it was easy after it was up about 10deg.










Reply With Quote
  #420  
Old 05-04-2011, 09:47 PM
td9clyde td9clyde is offline
Dozer Builder
 
Join Date: Aug 2010
Location: Keystone, IN
Posts: 728
td9clyde will become famous soon enoughtd9clyde will become famous soon enough
Default Re: 1/16 Bucyrus-Monighan Walking Dragline

simply in awwww just amaizing the detail still blows my mind on this crane
__________________
I built this thing and have it working now what do I do with it?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:11 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.