|
Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What esc?
Hey gents. What esc are you guys using for your dump boxes or screw drive tippers?
|
#2
|
||||
|
||||
Re: What esc?
Hobby King has a cheapy that works well for less than $11US.
|
#3
|
|||
|
|||
Re: What esc?
Thanks RCP!
|
#4
|
|||
|
|||
Re: What esc?
I don't use ESC as you never quite get full power to the motor....I use a 2-way switch with H-bridge relay setup to get a direct connection to the battery....although a bit more complicated that a 'plug and play' ESC!
|
#5
|
||||
|
||||
Re: What esc?
Sorry to hijack the thread but what one do you use Ric? Does it work with limit switches?
|
#6
|
||||
|
||||
Re: What esc?
Here is what Izzy and I use. It is only available at servocity. It has built in solder points for limmit switches to limit travel in both directions. These have been very reliable and have not had one fail yet, very happy with them.
https://www.servocity.com/html/elect...lled_dual.html Supply Voltage: 3.8-5.5 VDC Supply Current: 20ma static, 75ma energized Load Rating: 0-30 VDC at 12.0A Switching Time: 7.0 milliseconds Switch Resistance: .012 ohms Dimensions: 1.85”x2.70”x1.10” Weight: 1.4oz
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|