|
Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: Eagle Machinery Dozer track pin problems
Hi mate,
A friend of my has the same dozer and has the same problem, he just puts a drop or two of super glue on the just before he finishes hammering them back in, you could give that a go see if it helps. Regards Cam.
__________________
Sees no evil, Hears no evil, Speaks no evil To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#2
|
||||
|
||||
Re: Eagle Machinery Dozer track pin problems
Thanks Cam! I think I will try that. A friend suggested that or RED Locktite and let it sit overnight. That's a lot easier at least to try at first before trying to replace any. I think I'll try super glue first.
|
#3
|
|||
|
|||
Re: Eagle Machinery Dozer track pin problems
I too had the same problem with this dozer, I went ahead and used blue loctite with great success. Have not had problems since.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|