RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-28-2013, 01:08 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Bruder D11

I've had the new Bruder D11 model sitting on the shelf for a while and finally I had enough time to tackle the conversion. I have to say that the level of detail on this model is quite impressive and the plastic is quite beefy...it's almost like Bruder knows these are going to be used for conversions.

I am using Pololu 99:1 geared motor as my drives and at 7.2v it should produce about 200 oz/in torque per motor.
First I made an axle to connect the motor to the drive wheel and hub.













Reply With Quote
  #2  
Old 12-28-2013, 01:30 PM
tc1cat's Avatar
tc1cat tc1cat is offline
Super Moderator
 
Join Date: Aug 2010
Location: Northern Indiana
Posts: 1,318
tc1cat is on a distinguished road
Default Re: Bruder D11

Promising start!! Keep the pics coming Will be watching this conversion
__________________
LYNN
Reply With Quote
  #3  
Old 12-28-2013, 06:23 PM
rc_farmer's Avatar
rc_farmer rc_farmer is offline
Master Builder
 
Join Date: Aug 2010
Location: Arkansas
Posts: 828
rc_farmer is on a distinguished road
Default Re: Bruder D11

Those motors will work but the speed to toque ratio is very high. Reducing the voltage down to 7.4 will cut the speed but also will cut the torque rating too........ something around 150:1 would be much more suitable......if you have access to those motor.....don't want to discourage you, but wanted to let you now before you buttoned everything up.
__________________
Giving up is not an option!!!

Rob
Reply With Quote
  #4  
Old 12-28-2013, 08:59 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Bruder D11

It's going to be a fast dozer! Those motors are 100rpm at 6v. I like how you have them set up though.
Reply With Quote
  #5  
Old 12-28-2013, 11:43 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

I agree the dozer will not be to scale speed but I had these motors kicking around so I figured I would use them. I can always adjust the EPA's on my radio to scale the speed back. Plus I have so much rc stuff from years of racing and building etc that I told myself that I will use what I have and not buy more stuff (let's see how long that lasts...). More pics and progress coming soon.
Reply With Quote
  #6  
Old 12-30-2013, 03:04 AM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

So I got to working on the blade lift. I decided to use servos tucked into what would be the track tensioner.





I had to make a sliding mount for the servo horn to mount to. This was made with styrene and slides in the angle styrene brackets.









Reply With Quote
  #7  
Old 12-30-2013, 09:05 AM
kaptain Jack's Avatar
kaptain Jack kaptain Jack is offline
Journeyman
 
Join Date: Jan 2012
Location: Toronto Canada
Posts: 613
kaptain Jack is on a distinguished road
Default Re: Bruder D11

Looking good.Have you tested the range of motion? Is the servo strong enough?
Reply With Quote
  #8  
Old 12-30-2013, 09:10 AM
baker3 baker3 is offline
Newbie
 
Join Date: Nov 2013
Location: Missouri, Fort Wood
Posts: 52
baker3 is on a distinguished road
Default Re: Bruder D11

I thought about mounting a similar blade setup like that but ended up going with screwdrive type rams. Interested to see how that works out!
Reply With Quote
  #9  
Old 12-30-2013, 11:30 AM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

Quote:
Originally Posted by kaptain Jack View Post
Looking good.Have you tested the range of motion? Is the servo strong enough?
The range of motion is perfect, it travels exactly to the physical stops/limits on the model. I am using metal gear servos on each side so it is plenty strong it has an approximate combined torque of almost 100 oz/in.
Reply With Quote
  #10  
Old 01-03-2014, 04:59 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

I didn't like how the tracks had no rollers/bogies so I cut out the faux rollers and made some rollers.









Reply With Quote
  #11  
Old 01-03-2014, 05:05 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

I used a metal gear servo for the blade tilt







From there I added some LED's



Reply With Quote
  #12  
Old 01-03-2014, 05:14 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

Here is a shot of the guts, the semi circle pieces are wheel weights I had kicking around from 2.2" proline tires, they are zap strapped together and held down with heavy duty double sided tape. I need to put it on a scale but with the battery in it definitely has some weight behind it now.

Reply With Quote
  #13  
Old 01-03-2014, 05:20 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

So I got the dozer almost done. I decided not to automate the ripper as I have my doubts about the tracks holding up to the strain of ripping. I want to test it first and perhaps add some different grousers. I need to make the orange flashers and clean up some wiring and painting/weathering and it will be fully done. In the meantime here are some almost finished photos.









Reply With Quote
  #14  
Old 01-03-2014, 05:22 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

Here is a test video of it. Just need the monsoon rains we are getting in Vancouver to subside so I can get some actual working footage of it in the dirt.

Reply With Quote
  #15  
Old 01-03-2014, 05:35 PM
Mikeo78's Avatar
Mikeo78 Mikeo78 is offline
Green Horn
 
Join Date: Oct 2013
Posts: 196
Mikeo78 is on a distinguished road
Default Re: Bruder D11

Looks great! Nice job. Can't wait to see it push! 👍
Reply With Quote
  #16  
Old 01-03-2014, 10:25 PM
baker3 baker3 is offline
Newbie
 
Join Date: Nov 2013
Location: Missouri, Fort Wood
Posts: 52
baker3 is on a distinguished road
Default Re: Bruder D11

Nice job! I want to put some LEDs on mine but am clueless as to how and where to get them.
Reply With Quote
  #17  
Old 01-06-2014, 03:06 PM
motocrawler motocrawler is offline
Newbie
 
Join Date: Sep 2012
Posts: 44
motocrawler is on a distinguished road
Default Re: Bruder D11

Quote:
Originally Posted by Mikeo78 View Post
Looks great! Nice job. Can't wait to see it push! 👍
Thanks so much! Just need some decent weather so I can ge this thing out.

Quote:
Originally Posted by baker3 View Post
Nice job! I want to put some LEDs on mine but am clueless as to how and where to get them.
Most hobby stores carry LED light kits, I find the E flite kits work well to get the desired affect. But on these custom conversions I just end up making my own LED's.
Reply With Quote
  #18  
Old 01-07-2014, 09:14 AM
kaptain Jack's Avatar
kaptain Jack kaptain Jack is offline
Journeyman
 
Join Date: Jan 2012
Location: Toronto Canada
Posts: 613
kaptain Jack is on a distinguished road
Default Re: Bruder D11

Nice job,I wish we had rain instead of -25c
Reply With Quote
  #19  
Old 05-25-2014, 08:08 PM
longhairRandy longhairRandy is offline
Newbie
 
Join Date: Jan 2012
Location: Lansing Mi.
Posts: 55
longhairRandy is on a distinguished road
Default Re: Bruder D11

Great build! Any video of it moving dirt/rubber yet?
Reply With Quote
  #20  
Old 05-25-2014, 08:39 PM
Stuff's Avatar
Stuff Stuff is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Estevan, Sk, Canada
Posts: 1,281
Stuff is on a distinguished road
Default Re: Bruder D11

looks really great! well done!
__________________
Rc's are like pringles. You can't have just one!!
my YouTube is -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Subscribe!!
My Facebook -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.