Major glitching on 2.4 gHz

[Jack3M]

Ok, I spent some time on this yesterday. It seems that letting the sticks go and return to neutral will cause this the most. But, use of bucket seems to be the worst, followed by main boom.

It does not seem to do it as much for the arm as the boom which is same stick as bucket.... It hits the tracks first, the rotate second, and the boom next. Sometimes it hits every control function.

I started to put in a whole different radio, but it does not have 2 centering sticks. As I think on this, I think I will go ahead and still try that to eliminate the radio over the servos and wiring inside the machine.

Have not had leaks, a spill, but no leaks. Don't think the servos got wet, but will check

[Jack3M]

Yes one servo is causing this, the one for pressure relief. Now to figure out the proper replacement.(s)