RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2017, 11:11 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Bruder 320 conversion with 3d printed parts

After recently completing my little bruder bulldozer conversion I decided to next have a try at making an excavator. I began with a Bruder 320 and began cutting plastic. I will post pictures below as I make progress. I am teaching myself how to 3d model using Fusion 360 (free) and then printing the parts on my 3d printer. I will be using modified servo motors for the tracks as well as for slewing. I ordered a magom hydraulic pump and I am going to attempt to make my own cylinders and valves when I get that far.

Mount for track motor.

Hub Adapter

All Glued together
Reply With Quote
  #2  
Old 02-04-2017, 11:19 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Painted

Center pivot and gear.


Top Pivot

Assembled


Pinion gear
Reply With Quote
  #3  
Old 02-04-2017, 11:24 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Bearing Holder
There is as slip ring in there but I forgot to take pictures of it.



Reply With Quote
  #4  
Old 02-07-2017, 03:30 PM
rc_farmer's Avatar
rc_farmer rc_farmer is offline
Master Builder
 
Join Date: Aug 2010
Location: Arkansas
Posts: 828
rc_farmer is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Wow, that is slickon owl-stuff!
__________________
Giving up is not an option!!!

Rob
Reply With Quote
  #5  
Old 02-07-2017, 06:27 PM
Brob4 Brob4 is offline
Newbie
 
Join Date: Jan 2017
Posts: 3
Brob4 is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

nice build ! you have good idea for that build ! keep up good work !
Reply With Quote
  #6  
Old 02-14-2017, 08:32 AM
jeffgp jeffgp is offline
Newbie
 
Join Date: Aug 2014
Posts: 22
jeffgp is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

wow thats amazing work . i cant wait to see it all complete .
you might have to print me those files... my printer is down at this time
Reply With Quote
  #7  
Old 02-14-2017, 09:00 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Thanks for the kind comments, it is coming together ok as time allows. My pump and valve body arrived from Magom in Spain yesterday, what little pieces of art those are. I am currently working on attempting to build my own cylinders that hopefully wont spew oil all over the place
Reply With Quote
  #8  
Old 02-14-2017, 09:04 AM
scottyk scottyk is offline
Newbie
 
Join Date: Jun 2013
Posts: 112
scottyk is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Nice work! I love that turn table with a bearing and everything. Now time to try some 3d printed hydraulic cylinders?
Reply With Quote
  #9  
Old 02-14-2017, 09:58 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

The cylinders are proving to be difficult to construct. There is a fine balance between too tight/won't move, and too loose/leak all over. Unfortunately though the printer is of no help there since the parts need to be machined and very smooth, and to pretty accurate size. I will post a pic if I can get a cylinder working later.
Reply With Quote
  #10  
Old 02-14-2017, 10:26 AM
scottyk scottyk is offline
Newbie
 
Join Date: Jun 2013
Posts: 112
scottyk is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

yeah I would imagine you would have to machine everything just like you would with metal. I would think doing a acetone smoothing that would create almost a hardened shell around the outside of a abs part and then machine that. Everytime I try to get a good finish on this thermoplastic it ends up melting and I havent been able to get a real good surface finish, but I havent invested too much time trying either.
Reply With Quote
  #11  
Old 02-14-2017, 12:19 PM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Here are some pics of a couple of the cylinders I made. 1 of the three I made is perfectly leak free, the other two ....not so much! Nothing horrible but they are dripping around the gland where the shaft leaves the end of the cylinder. It looks like I need to re invent my seals somehow. It was pretty neat to see them moving though, and even with the pump just barely turning they are quite powerful.



Reply With Quote
  #12  
Old 02-26-2017, 02:50 PM
Cre8rc Cre8rc is offline
Newbie
 
Join Date: Mar 2016
Location: Kelowna B.C. Canada
Posts: 34
Cre8rc is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Very nice work on the 3D printed parts and custom cylinders.
Reply With Quote
  #13  
Old 02-27-2017, 04:07 AM
5inchman's Avatar
5inchman 5inchman is offline
Newbie
 
Join Date: Apr 2013
Posts: 15
5inchman is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Wow those cylinders look absolutely superb.
Please could you publish drawings/details of them?
Have you used lost wax castings for some of the parts?
I would like to be machining these out of barstock

5

Last edited by 5inchman; 02-27-2017 at 04:15 AM.
Reply With Quote
  #14  
Old 02-27-2017, 08:57 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Thanks for the compliments. The cylinders are simple in theory but I am finding that having the gland end seal without leaks is easier said than done. I made 4 cylinders. 2 are great while the other 2 leak so my design of using o rings as a seal may not prove to be workable in the end. No casting is involved, all lathe work. the barrels are just 1/2" copper pipe which happens to already pretty much have a mirror finish inside (I assume from the drawing process) and the end caps are machined from brass stock. the internals of the cylinders consist of aluminum pistons with steel shafts. No drawings, but if you look on the MagomHRC website you will see that they have very good exploded drawings. Honestly for about 50 bucks a cylinder it is probably best to just buy the cylinders from them, but where is the fun in that!
Reply With Quote
  #15  
Old 02-27-2017, 09:55 AM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

You are doing some nice work here. Guess you are finding the cylinders a bit tricky to make. Keep at it- you can make it work. Good Luck
Reply With Quote
  #16  
Old 02-27-2017, 02:10 PM
avel avel is offline
Green Horn
 
Join Date: Mar 2014
Location: Kalispell, Montana
Posts: 228
avel is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

If you are going with Magom cylinders this french forum has a guy who modified his Magom cylinders to be more reliable as far as leaks.

http://camions-rc.fr/forum/viewtopic...4474&start=240

He might also have more information on what he did in this build thread, I'm not really sure where.
http://camions-rc.fr/forum/viewtopic...2937&start=360

I use Google translate to read his stuff.
__________________
Youtube username iamaman27
Reply With Quote
  #17  
Old 02-28-2017, 11:39 AM
5inchman's Avatar
5inchman 5inchman is offline
Newbie
 
Join Date: Apr 2013
Posts: 15
5inchman is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Quote:
Originally Posted by NebraskaTrevor View Post
Thanks for the compliments. The cylinders are simple in theory but I am finding that having the gland end seal without leaks is easier said than done. I made 4 cylinders. 2 are great while the other 2 leak so my design of using o rings as a seal may not prove to be workable in the end. No casting is involved, all lathe work. the barrels are just 1/2" copper pipe which happens to already pretty much have a mirror finish inside (I assume from the drawing process) and the end caps are machined from brass stock. the internals of the cylinders consist of aluminum pistons with steel shafts. No drawings, but if you look on the MagomHRC website you will see that they have very good exploded drawings. Honestly for about 50 bucks a cylinder it is probably best to just buy the cylinders from them, but where is the fun in that!
Thanks for those details, MagomHRC do have some nice detail drawings. My experience with "O" rings is limited to fire service breathing apparatus pressure reducing valves. These had a hollow piston about 1/4" diameter sealed in a cylinder with static "O" ring the pressure on one side was 3000psi the pressure on the other side 125psi. It was sometimes found that the pressure on the low pressure side increased. On close inspection it was often down to scratches on the piston or poor "O" rings. The remedy was to polish the piston to remove longitudinal scratches and check the "O" rings discarding any that showed damage or moulding flash etc. Crikey I do seem to go on
Reply With Quote
  #18  
Old 03-04-2017, 10:02 AM
NebraskaTrevor NebraskaTrevor is offline
Newbie
 
Join Date: Jan 2017
Posts: 22
NebraskaTrevor is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

It has proven to be a bit more difficult than I thought it would be to eliminate the leaks around the shaft of the cylinder. I haven't done anything with them for a couple weeks but I will get back to them soon, in the meantime I will follow the links posted above to see what I can learn. Thanks!
Reply With Quote
  #19  
Old 09-16-2017, 12:05 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Quote:
Originally Posted by NebraskaTrevor View Post
After recently completing my little bruder bulldozer conversion I decided to next have a try at making an excavator. I began with a Bruder 320 and began cutting plastic. I will post pictures below as I make progress. I am teaching myself how to 3d model using Fusion 360 (free) and then printing the parts on my 3d printer. I will be using modified servo motors for the tracks as well as for slewing. I ordered a magom hydraulic pump and I am going to attempt to make my own cylinders and valves when I get that far.

Mount for track motor.

Hub Adapter

All Glued together
nice
Reply With Quote
  #20  
Old 09-16-2017, 12:07 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Bruder 320 conversion with 3d printed parts

Quote:
Originally Posted by NebraskaTrevor View Post
Painted

Center pivot and gear.


Top Pivot

Assembled


Pinion gear
Me likes it a LOT
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:16 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.