RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Big Boys of the road 4x4/6x6/8x8/10x10 Trucks

Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-18-2016, 07:51 PM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Arrow Project 8x8

Hi all. I am in this hobby for 15 years now, not active all the time.Last year after few years of pause, I bought tamiya hilux to drive around with my friend. And afer some time and talking, we discovered a world of 1/14. He bought 6x4 scania, and I bought a Bruder toy I tought I could do the conversion to RC as Bruder toys look very nice.
I bought this crane

And then these to

Also rc fork lift


Then I had to say STOP, as I had many toys that I can only watch

So started to brake it down


I see that I cant use this chassis, tires and wheels are useless, so only cabin and crane for now. As I bought 2 trucks, the main thing to do was to make chassis for them. Some calculations later showed that I need 22 wheels, 22 tires, 7 axles,... $$$$$$$$ Maybe it would be better that I just bought tamiya truck and call it a day

But I didnt

First I started doing the most expensive part, the axle. But hey, front axle is not that expensive, so I made a design for drop axle, and some wheel hubs, to see how tamiya truck tires will look on Bruder. I used my 3d printer to print out my design.







Soon after that I started looking for some small cheap open differentials, and found something fo a 1/12 scale buggy that I thought might work. Ordered it, and started to design my axle around it. Somewhere along the way a friend called me and said that he needs all wheel drive to drive offroad, rwd is just not enough he said.
So I droped drop axle, and decided to go al wheel drive. A spent some time working on the axle design, printed out 10 different ones to find the best solution.



Then when I thought I had it, friend called again and said: "My friend, we need to have remote locking to help us when we get stuck offroad!"
Ohhh, here we go again. So I did a simple locker for my bought diff.



I dont like how this version is engaged, I have some other ideas for it, but I need to find a thin cable with tubing I could use, and then I will continue with lockers. For now its on hold, but I left the axles with the place to install lockers later.
So this is the first version of the rear axle with V1 locker instaled



Then I decided to drink one beer



Then it all goes bad. I realised I dont have enough tamiya wheels to see how it will look like when I put 2 axles at the rear. So I decided to design my own wheels and print them out.
Then I realised I dont like tamiya hex, and I want scale 10 bolts hubs. So I designed new wheel and hub. Then I needed leaf springs for the rear. I tried to design and print them, and I was very supprised as they worked really good. First design was something like tamiya use, but than I realised thats far from scale, so I used some Actros photos to see how the real thing looks like. Few days, and many sleepless nights later, I had all of this on my desk.

















Reply With Quote
  #2  
Old 01-18-2016, 07:56 PM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

Then was the time to use some aluminium profile for the frame. I dont really like it and I will use it only for a prototipe, I want it all in steel for final version.



Then realised I need a transfercase to connect all the axles to the motor. So designed one and started printing







Next thing to do was front and rear susspension. I used really truck photos for the reference. You will notice one fail i my idea of using scale 10 bolt wheels design. When you realise you have 8 wheels x 10 bolts, thats 80 bolts and nuts, and at the time I was happy to find 20 But a 100 just arrived today









Then I had to do the steering, so to make it right I needed to check my ackermann and turn radius.



And then do the steering links





While I was going crazy with all the angles for steering, to chillout and give myself a smile back on my face, I did a simple carrier for my bruder cabin.





An with smile on my face finished steering links



So that is pretty much where I am at right now. I tried to make some drive shafts, just to see all of the wheels move, and test the drivetrain. My idea was to use a 12V dc motor with gearbox on it with 350rpm output. But it seems underpowered. So I decided to go to classic 560 motor and I ordered a tamiya 3 speed gearbox just to test it. But the plan is to make my own gearbox, probably 2 speed, as it seems enough and uses less space.
I wont be working on the truck for a week or two now as I am busy, but for that time I am open to any suggestions or comments, and a good advice for maybe where to find some cool parts I could need.

Hope you like my post
Reply With Quote
  #3  
Old 01-18-2016, 08:11 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: Project 8x8

That's awesome! Really nice work on the axles and suspension. Yes you could have bought a Tamiya truck for less but this is way better. No one else will have one like what you have built and to me that is perfect!

Reg
Reply With Quote
  #4  
Old 01-18-2016, 10:29 PM
Rakthi's Avatar
Rakthi Rakthi is offline
Apprentice
 
Join Date: Apr 2014
Location: Back in Belgium
Posts: 476
Rakthi is on a distinguished road
Default Re: Project 8x8

Cool project and a great choice of beer!
__________________
Cheers, Stephan (Rakthi is the one in the avatar)
Reply With Quote
  #5  
Old 01-19-2016, 08:53 PM
Prop Shaft's Avatar
Prop Shaft Prop Shaft is offline
Newbie
 
Join Date: Jul 2014
Location: St John's NL
Posts: 147
Prop Shaft is on a distinguished road
Default Re: Project 8x8

Very impressive. What scale is the bruder body?
Reply With Quote
  #6  
Old 01-21-2016, 09:58 AM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

Tnx guys.

Bruder is advertised as 1/16, maybe its a bit smaller than tamiya, but I dont really notice it.
Reply With Quote
  #7  
Old 01-29-2016, 01:01 PM
matis88 matis88 is offline
Newbie
 
Join Date: Nov 2011
Location: Boucherville, Quebec, Canada
Posts: 3
matis88 is on a distinguished road
Default Re: Project 8x8

Quote:
Originally Posted by Rakthi View Post
Cool project and a great choice of beer!
Yeah I was thinking the same thing about the beer.

Nice work too.
Reply With Quote
  #8  
Old 01-29-2016, 02:22 PM
Cooper's Avatar
Cooper Cooper is offline
Big Dawg On The Bone
 
Join Date: Oct 2013
Location: Watsontown, Pa
Posts: 2,119
Cooper is on a distinguished road
Default Re: Project 8x8

Quote:
Originally Posted by matis88 View Post
Yeah I was thinking the same thing about the beer.

Nice work too.
Double that!!! More dark beer!!!
__________________
Always wasting money, as the wife says.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 01-29-2016, 03:03 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Project 8x8

Quote:
Originally Posted by Cooper View Post
Double that!!! More dark beer!!!
you drink dark beer and your parts get wonky!! stick with light beer cooper
Reply With Quote
  #10  
Old 02-02-2016, 08:15 PM
jeffgp jeffgp is offline
Newbie
 
Join Date: Aug 2014
Posts: 22
jeffgp is on a distinguished road
Default Re: Project 8x8

killer build . i could use some axles like that for one of my builds
Reply With Quote
  #11  
Old 02-03-2016, 02:39 AM
Bobby Bobby is offline
Newbie
 
Join Date: Jan 2016
Location: Leeds
Posts: 21
Bobby is on a distinguished road
Default Re: Project 8x8

Master build. Accurate work.
Reply With Quote
  #12  
Old 02-04-2016, 01:41 PM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

Tnx guys. There is no update yet, I am busy with my college exams, and I am doing some work on my workspace, so I can make better parts for my truck. I just started to make a small table cnc mill just big enough to make axle housings from aluminum.
Only update is, i bought tamiya 3speed gearbox to fit on the truck so I can test all the components. And also i placed an order on a tamiya man 4x2 to compare the size an have something for reference.
Reply With Quote
  #13  
Old 02-04-2016, 01:45 PM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

Quote:
Originally Posted by jeffgp View Post
killer build . i could use some axles like that for one of my builds
Let me give them a good test and find the week spots to fix. And then I would be able to make more and sell them if someone needs them. I guess it would be nice to be able to buy cheaper axles, and again functional and strong enough.
Reply With Quote
  #14  
Old 04-04-2016, 07:30 PM
Gregg Gregg is offline
Newbie
 
Join Date: Nov 2011
Location: New Jersey
Posts: 89
Gregg is on a distinguished road
Default Re: Project 8x8

I'm at the same point with my project .A complete stand still. i have yet been able to get a set of 8x8 axles that i can actually afford. The stuff on the market is really good stuff but way out of my price range. i just need some functional axles that work but cont need to be built like a tank. With all the 3d guys making their own parts now it would be great if someone could build and market a nice 8x8 set up that you dont need to take out a second mortgage to pay for.
I ultimately wanted to build a Marine Mk48 that is not in service anymore but i really like the front and rear articulation function of it.
Just need 2 front steerable axles and 2 rear straight drives.
I pretty much have everything else i need for the job but the the axles.
Anyone know of an affordable 8x8 set or someone who can make a set?
Reply With Quote
  #15  
Old 04-09-2016, 06:07 AM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

Hi guys, sorry for late update. I had a ton of other things to do. I had some problems with my 3d printer, so had to replace some parts and calibrate it all over again. I mounted the cab on the truck and fitted tamiya gearbox with motor under it. That gearbox is really too big for scale look so I will have to make smaller one for the new truck.

Update on this build, I decided that this will be finished like this, I hope to make it run in next few days. I bought Tamiya Man tgx tractor and got a bit dissapointed when I compared the bruder cab with tamiya. Bruder is a bit smaller, and from when I was a kid, i never liked mixing scales, so on the next truck I am moving on a 1/14 scale. Bruder is great in detail, much better looking than tamiya, but size matters. As I allready bought 2 bruder trucks, I guess I will make 2 chassis for them, and then go to 1/14, and put bruders up for sale as I dont have enough space in my apartment allready.

Big update is, 8x8 1/14 truck is my masters work for college now, so I will have to work on it fast, and finish it in next 3 months. It will be based on this design,but 3d print will be replaced with laser cut steel, frame will also be steel,axles cnc aluminum. I will try to go as scale as possible in this short period that I can. The thing I will use 3D printer this time will be the cab, as I dont wont to use bought cab for my masters work. In the last month I started learning 3D design in solidworks, so this is what I came up with for now. Anyone knows what it is?

Reply With Quote
  #16  
Old 10-03-2016, 01:40 PM
lxpower lxpower is offline
Newbie
 
Join Date: Nov 2011
Posts: 1
lxpower is on a distinguished road
Default Re: Project 8x8

Wow a Volvo FMX? Looking forward for update
Reply With Quote
  #17  
Old 10-04-2016, 06:02 AM
Doggy's Avatar
Doggy Doggy is offline
Newbie
 
Join Date: Oct 2015
Location: Croatia
Posts: 125
Doggy is on a distinguished road
Default Re: Project 8x8

You can find new Volvo photos on facebook page. I am in the middle home renovation so hobby is on hold. This 8x8 was a nice prototype to learn, but for the FMX I am working on a scale chassis with scale volvo axles and it will be 8x6, as Volvo doesnt make more than 3 driven axles.
https://m.facebook.com/Scale-Product...7534910171976/
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:13 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.