RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-12-2015, 08:34 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default china kat

well it got here today!!! post office lady popped it on the scale 34 lbs
in the box.

pic above was with the flash on the one below is the real color


a few thing that need to be pointed first I don't read Chinese and the copy of a copy of a copy

pictures suck in the instruction book. next I bought the kat a1 bf witch I thought meant I get a black base

they shipped the silver. next was the pump motor BRUSHED not brushless like the pic online shows!!

the slip ring wires are so thin compared to the drive motor wires i'm not sure that will work???

the servos are tower pro mg995(digi hi speed) only work one at a time if I plug two in one gets wonky

and the esc beeps(could be a weak batt) the only esc not marked drive I guess it for the turn table

that only rotates in one direction... my viper 15 hooked up goes both ways(again cant read Chinese)

Last edited by bigford; 03-12-2015 at 08:45 PM.
Reply With Quote
  #2  
Old 03-12-2015, 09:33 PM
andyathome andyathome is offline
Wannabe
 
Join Date: Apr 2014
Location: Pokeno New Zealand
Posts: 384
andyathome is on a distinguished road
Default Re: china kat

Also watch the hyd lines they dont like too much pressure and tend to shower oil every where when they blow.
I found it was like russian roulette , waiting waiting ...bang ... oh crap. LOL.
But its a start you have an excavator.
now build it .
cheers andy
Reply With Quote
  #3  
Old 03-12-2015, 10:02 PM
Supermario's Avatar
Supermario Supermario is offline
Big Dawg On The Bone
 
Join Date: Apr 2012
Location: Sault Ste Marie
Posts: 2,039
Supermario is on a distinguished road
Default Re: china kat

Congrats on the new toy Mark. im sure your going to enjoy adding your personal touch to it. . Is it just the pic or does the upper structure look like its leaning back and not level?
Reply With Quote
  #4  
Old 03-12-2015, 10:15 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

upper was just sitting the base with the drivewires itin the way
i wanted just the empty machine BUT they now do not sell it
that way. it is all aluminum and heavy it gave the single firgelli
a work out lifting the lowboy up
Reply With Quote
  #5  
Old 03-12-2015, 11:15 PM
Cooper's Avatar
Cooper Cooper is offline
Big Dawg On The Bone
 
Join Date: Oct 2013
Location: Watsontown, Pa
Posts: 2,119
Cooper is on a distinguished road
Default Re: china kat

Congrats on the addition. Just as much fun setting um up as running um!! Take your time as you'll be running her soon enough. And it's gonna take us a while for rest of this snow to melt and thaw ground!! My backyard pit is almost melted but rock solid ice under a nice slippery mud layer! Looks sharp all painted up nice. Did they send cat decals also? I remember someone saying they have on earlier models.
__________________
Always wasting money, as the wife says.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 03-13-2015, 03:43 AM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: china kat

My KAT also did arrive with the superstructure bent down in the back. I am following a series of chef Gordon Ramsay's Hells Kitchen at the TV now, and I can't avoid imagine him taking a trip to the KAT fabricators 'kitchen'... 'It's all ****, don't you have ANY pride in what you doing?! How DARE you present this to your customers at these prices?!' Hehe..sorry, good luck with the machine. It's possible get it going with some DIY effort)
Reply With Quote
  #7  
Old 03-13-2015, 03:56 AM
headers headers is offline
Newbie
 
Join Date: Jan 2012
Location: ft.worth tx
Posts: 131
headers is on a distinguished road
Default Re: china kat

Congrats on your new addition she's looking good
Reply With Quote
  #8  
Old 03-13-2015, 09:21 AM
cosworth34677's Avatar
cosworth34677 cosworth34677 is offline
Journeyman
 
Join Date: Nov 2012
Location: clearwater fl
Posts: 732
cosworth34677 is on a distinguished road
Default Re: china kat

so is worth getting or is better to get the magom hrc one?
Reply With Quote
  #9  
Old 03-13-2015, 11:29 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

magom never answered my what size is the machine .
looks like a older case excav. the kat looks like a cat 345L
Reply With Quote
  #10  
Old 03-13-2015, 12:42 PM
cosworth34677's Avatar
cosworth34677 cosworth34677 is offline
Journeyman
 
Join Date: Nov 2012
Location: clearwater fl
Posts: 732
cosworth34677 is on a distinguished road
Default Re: china kat

ahh ya they are hit or miss with emails....
Reply With Quote
  #11  
Old 03-13-2015, 02:35 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

here is the pic of the slip ring wires
top wires are servo then slip ring then motor and battery wire

the slip ring wire is so thin I cant see power going from the esc to that then to the drives
Reply With Quote
  #12  
Old 03-13-2015, 04:48 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

a little vid of the rotation seems smooth
https://www.youtube.com/watch?v=eIWmxhkbHxw
Reply With Quote
  #13  
Old 03-13-2015, 07:14 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

https://www.youtube.com/watch?v=MnJPv584P84
it's alive!!!!!
heres one for brian @ EXCLUSIVE RC
https://www.youtube.com/watch?v=cIt9I-lvU9U
Reply With Quote
  #14  
Old 03-13-2015, 07:25 PM
RCP57's Avatar
RCP57 RCP57 is offline
Big Dawg On The Bone
 
Join Date: Mar 2011
Location: Vancouver Island
Posts: 3,677
RCP57 is on a distinguished road
Default Re: china kat

You must be stoked! I think they are a nice looking machine given the price. I'm sure with some tweaking it will work great too! I know you just got it but what are your impressions on the track drive motors? The speed looks good but do you think they are really torquey? I have almost ordered a pair a few times to replace the motors on my EC300 but keep putting it off. I am tired of tearing up the gearboxes on my current motors though and need something new before the summer show season. My excavator is over 50lbs though so they need to be quite powerful.

Thanks for the input!

Reg
Reply With Quote
  #15  
Old 03-13-2015, 07:46 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

kinda hard to say reg it climbed the grass lip off the driveway with no problem
and up onto the lowboy the same way. all the motors are marked 12 volt and
look like drill motors
Reply With Quote
  #16  
Old 03-13-2015, 08:30 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

like it was said good bang for your buck BUT the Q/C is lacking

the drive hub is steel along with the fixed idle wheel and guide rollers


lock nuts on some things and others just have plain nuts and no Loctite no berring or shims
the gaps on the hydraulic are silly need spacers every where
Reply With Quote
  #17  
Old 03-13-2015, 09:02 PM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

the boom and dipper and bucket



no spacers to align the two cylinders from the base to the boom
Reply With Quote
  #18  
Old 03-13-2015, 11:33 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: china kat

It sounded like wifey was running the camera, she give you a wink & smile yet?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #19  
Old 03-14-2015, 01:13 AM
Exclusive RC Exclusive RC is offline
Journeyman
 
Join Date: Oct 2013
Posts: 610
Exclusive RC is an unknown quantity at this point
Default Re: china kat

Nice bro, hope u get it all worked out in time for cabin fever!
Reply With Quote
  #20  
Old 03-14-2015, 03:24 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
 
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: china kat

Quote:
Originally Posted by Lil Giants View Post
It sounded like wifey was running the camera, she give you a wink & smile yet?
na that was my 11 y/o. all of a sudden 4 deer showed up to graze across
the street it was all she could to keep on the kat
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.