RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Big Boys of the road 4x4/6x6/8x8/10x10 Trucks

Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road.


Reply
 
Thread Tools Display Modes
  #21  
Old 07-20-2017, 03:14 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Thumbs up Re: Thoughts on the RC4WD BEAST II 1/14?

Oh I know, I just generalized the ease of the project. You're a wealth of information Bret and I do appreciate it.

I should just be happy with a semi (which cost is not an issue) and stick a body on it, therefore having an easy future transporter (that is not the main goal) but the 6X6 idea and it might being my only truck makes me overthink it. LOL I want sound too (I know is extra $$$)... imagine a Tamiya tank with no sound at all or a wimpy one like a HL.

I'll get there soon. I'm starting to sound like the indecisive newbies on RCU. One thing I do like more and more is the CROSS. It's not that much more $$$ and it is more robust PLUS comes with a better body I would be happy with, even at first.

Now, push the button and shut up, right?
Reply With Quote
  #22  
Old 07-20-2017, 04:32 PM
sassgrunt sassgrunt is offline
Newbie
 
Join Date: Dec 2011
Posts: 83
sassgrunt is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

Bret is absolutely right about not just having the axle to consider, Jeff. Along with a transfer case that allows both ends to be driven, you'd also have to decide on how much articulation you wanted (which leads you into a whole other world of complexity), and also you'd have to make/modify/buy drive shafts that would fit. Sorry for oversimplifying all that.

I've done a couple of these in the past, and for the money you'd need for the parts (as well as all the head-scratching to get them to work together), if I had it to do again - I would vote for the Cross. RC4WD has had some sales in the past for their kits, and that might be worth watching. Also, Ali Express has kits that are usually cheaper than elsewhere. And, you could always substitute a fifth wheel for the bed, (by screwing a plate to the frame and the fifth wheel to that). There are even aftermarket fifth wheels now that can rock from side to side, and not just fore-and-aft like the stock Tamiya ones. Would help with something you intend to take off road, hitched to a trailer.

A few people have converted the plastic Bruder flatbed into a tank transport trailer. Usually involves lengthening the bed a little and changing the kingpin to something that will connect to an RC fifth wheel. But, they're not very expensive; even if you wanted to splice two together to make a longer one.

Last edited by sassgrunt; 07-20-2017 at 04:38 PM.
Reply With Quote
  #23  
Old 07-20-2017, 05:01 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

That's okay Mike and I thank you for your help. Maybe I shouldn't have oversimplified that I know nothing about trucks... it's RC trucks to be exact. But, I have learned quite a lot just being on this forum.

I have a fairly high degree of knowledge in mechanics since I once was an ASE Certified Auto and Truck Technician for many years and was not a 'parts replacer' like at the auto centers you will find today. I hand built my everyday drive to work street Camaro so, underneath it was not original or stock. So, that should explain that I know it's more than just getting the driveshaft up front.
Reply With Quote
  #24  
Old 07-20-2017, 05:57 PM
TheBennyB TheBennyB is offline
Apprentice
 
Join Date: Apr 2016
Location: West Grove, PA
Posts: 437
TheBennyB is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

No sweat Jeff. Hanging around the likes of Daryl T and Willy has taught me a lot over the years. Yea, I did the bruder conversion as well as a goldhofer. Used the Actuonix stuff to get the ramps r/c.

https://www.actuonix.com/L12-R-Linea...ol-p/l12-r.htm
Reply With Quote
  #25  
Old 07-20-2017, 09:03 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Thumbs up Re: Thoughts on the RC4WD BEAST II 1/14?

Acknowledged... those 2 will do that.

Wish I lived closer.
Reply With Quote
  #26  
Old 07-21-2017, 06:39 PM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

Quote:
Originally Posted by Panther F View Post
I cannot thank you guys enough for all your eye opening suggestions and advice. I told you I know nothing about trucks, only what I have learned right here. My fault for being so one dimensional with armor all these years, not that I'm a know-it-all in that hobby.

I didn't know the Tamiya semis were just a floor pan chassis with a ladder frame attached in the rear. I thought they were all metal framed. THAT'S the allure on the 6X6's. I kinda thought there would be more work to put a driven front axle in the semis and the matching of gear ratios plus all the hardware. They just don't have a section where it's all ONE package to change your truck over to (there should be but there's probably a reason why) all wheel drive. That's why I looked at the BEAST and just sacrifice the fifth wheel arrangement for now.

It'll be tough for me to just build one of these 6X6 trucks, as an RTR is not for me (or cost effective either) but we'll see.

Just when I think I know what to settle for...
Not sure what you mean by "floor pan chassis with a ladder frame attached in the rear". The Tamiya 1/14 scale trucks have as close to any 1:1 Class 8 truck chassis that I've ever seen in model form. Not being critical just trying to under stand the comment. I like 6x6 chassis' and have built one in mostly Tamiya 1/14 scale parts and I'm collecting parts for another one, the difficulty is finding TLT front axles. If money is no issue there are a few after market sets to choose from but you have to replace all of them. I did a build thread on here of my 6x6 using Photobucket so of course the pictures are gone from here but I still have the originals, if you want any help just ask.

Last edited by TRUCKMAKER; 07-21-2017 at 06:42 PM.
Reply With Quote
  #27  
Old 08-06-2017, 03:23 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Question Re: Thoughts on the RC4WD BEAST II 1/14?

I am corrected on that... must have been the racing semi truck frame I saw.

What sound electronics are they using on truck builds? Can the Tamiya module handle a 3 axle powered arrangement? Like a tank, I have to have sound.
Reply With Quote
  #28  
Old 08-06-2017, 04:36 PM
TRUCKMAKER's Avatar
TRUCKMAKER TRUCKMAKER is offline
Big Dawg On The Bone
 
Join Date: Aug 2011
Posts: 1,652
TRUCKMAKER is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

Sound modules have nothing to do with number of powered axles, basically it comes down to sound effects or type of engine sounds. Depends on whether your happy with what sounds a system comes with or would rather record and use your own, and last but not least how deep the hobby fund pockets are lol.
Reply With Quote
  #29  
Old 08-06-2017, 07:24 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

I guess then where to purchase them?

As long as the amp draw and voltage range are within limits?
Reply With Quote
  #30  
Old 08-06-2017, 11:18 PM
Nikaem Nikaem is offline
Newbie
 
Join Date: Feb 2015
Posts: 113
Nikaem is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

you know I did build my zetros on the HG-P604 chassis and it is a 6x6 with the 2 speed transmission also there are a pile of metal upgrades for that platform also the price point is really low
https://www.aliexpress.com/item/High...460.0.0.CxCLmE
I have had a lot of fun with that truck it pulls my 10lbs of single drop trailer with no issue.
the only complaint I have is it has a really bad truning radius

and here it is as a hauler

lights and sound is just a module
https://www.aliexpress.com/item/Orig...7df712f0&tpp=1
just one example how ever there is a couple of other options as well
https://www.aliexpress.com/item/HG-A...cdfe83f1&tpp=1
https://www.aliexpress.com/item/1-10...cdfe83f1&tpp=1
not a fan of MOA but
https://www.aliexpress.com/item/1-10...cdfe83f1&tpp=1
https://www.aliexpress.com/item/WLto...AbTest=ae803_3
hope some of this is helpfull

Last edited by Nikaem; 08-06-2017 at 11:46 PM.
Reply With Quote
  #31  
Old 08-07-2017, 11:02 AM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

THANKS so much! Getting educated and opening my eyes... I greatly appreciate it! The links opened dozens of doors to RC trucks and I am narrowing down my decision. I do like the plug-n-play aspect but having someone load a card and going from there is a start too. Just depends on the $$$ I want to invest, I see pro's and con's of all of them.

The chassis information and searching youtube has helped tremendously.
Reply With Quote
  #32  
Old 08-07-2017, 12:47 PM
Efroeh Efroeh is offline
Wannabe
 
Join Date: May 2016
Location: sask canada
Posts: 310
Efroeh is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

What about integy 6x6. Not rtr but looks like a beast.
http://www.integy.com/st_prod.html?p...w#.WYiZOclrnqC
Reply With Quote
  #33  
Old 08-07-2017, 04:41 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Thumbs up Re: Thoughts on the RC4WD BEAST II 1/14?

Oh, holy crap. I need to do more homework but first I need to sit down after seeing this for the first time.

I see it's a ARTR, so it's pre-built.

Last edited by Panther F; 08-07-2017 at 05:20 PM.
Reply With Quote
  #34  
Old 08-07-2017, 06:57 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

I also saw this one: http://www.integy.com/st_prod.html?p...ratesortby=New

AW steer? I need to drop by you tube to learn more!
Reply With Quote
  #35  
Old 08-07-2017, 07:04 PM
Efroeh Efroeh is offline
Wannabe
 
Join Date: May 2016
Location: sask canada
Posts: 310
Efroeh is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

The link I shared has all wheel steer also. I have a beast was a kit version and it does what it's meant for. The body is plastic but it does alright in some crawling. I'll have to figure out how to post some pics of it.





Last edited by Efroeh; 08-07-2017 at 07:10 PM.
Reply With Quote
  #36  
Old 08-07-2017, 08:27 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

That's sweet! Thanks for all the information.
Reply With Quote
  #37  
Old 08-08-2017, 12:39 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

For sound, ESS ONE PLUS
http://www.ebay.com/itm/SENSE-INNOVA...19.m1438.l2649
Reply With Quote
  #38  
Old 08-08-2017, 08:24 AM
kaptain Jack's Avatar
kaptain Jack kaptain Jack is offline
Journeyman
 
Join Date: Jan 2012
Location: Toronto Canada
Posts: 613
kaptain Jack is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

I'm a bit confused, the wording on Alibaba is mechanical translation and makes very little sense. One of the offers is :
//www.aliexpress.com/item/1-10-scale-RC-Rock-Cralwer-Truck-8x8-RC8WD-Body-Kits-Chassis-Frame-Kits-Military-Tractor/32807206744.html?scm=1007.13446.47369.0&pvid=f031f 521-1a8b-4494-84f0-0f8fcdfe83f1&tpp=1
Is it complete body and chassis with wheels ? for under $300? Sounds to good...
Reply With Quote
  #39  
Old 08-08-2017, 10:48 AM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

Hover over the thumbnails and you will see the variations and prices. The under 300 bucks is all plastic.
Reply With Quote
  #40  
Old 10-01-2017, 03:01 PM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: Thoughts on the RC4WD BEAST II 1/14?

Well, as luck would have it I scored on eBay a used CROSS XC6A that 'looked' good and in the description needed the middle gear assembly replaced as they claim it's stripped.

It should arrive the end of this week... here's hoping there's no damage in transit. I'm trying to learn as much as I can on it in the meantime but everyone seems to be very happy with theirs.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.