RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's General Discussion. > Welcome New Members

Welcome New Members A place to introduce yourself to the membership.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-21-2015, 07:30 AM
Digger_Bear Digger_Bear is offline
Newbie
 
Join Date: Jul 2015
Posts: 70
Digger_Bear is on a distinguished road
Default Newbie from UK

Hello everyone,

Just signed up to the forum so thought I introduce myself.

Been into RC Tanks 1/16 scale for a few years now but over a last year or so got into trucks and construction vehicles. Now I’m not really a modeler, so get more enjoyment out of re-engineering models so my recent conversions have included a Bruder dozer to full RC with lift/lower & tilt blade and lift/lower drag claw as well as lights. Also nearly completed is a Bruder Scania to RC with full lighting and sounds using the IBU2 Truck control unit.

I also became a dealer for the IBU-electronics (http://www.ibu-electronics.com) about 2 years ago. Since then following customer request expanded my range of items to sell various other items including the Polish built TARR smoke units which are mainly for the tank customers but also had interest from truck and boat customers. My websites
www.rctankelectronics.weebly.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.facebook.com/RCTankElectronics

But the main reason for joining the forum is because I recently purchased a Magom HRC MG1.4 excavator complete with hydraulics.

This is a very nice kit but unfortunately does not come with instructions and as a total newbie with hydraulic systems I turned to the internet which found the forum with plenty of information on the matter. So I be posting pictures and questions in the construction section.
Reply With Quote
  #2  
Old 07-21-2015, 08:56 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Newbie from UK

Certainly have seen many of the Bruder converted models from Magom, but haven't seen their full metal version yet... does the hyd system for this version still use antifreeze for its fluid power or have they upgraded their pumps for hyd oil for greater fluid power?

I don't want to be a heavy on your 1st post, but I hope you read the rules you accepted before joining our forum about advertising & sales rules? We don't let just any one throw up a shingle. The requirements are pretty simple for your own Vendor's forum, but it must be approved by the Admin team 1st. Contact a mod if you choose to be a part of our Vendor list.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #3  
Old 07-22-2015, 04:22 AM
RCKiwi RCKiwi is offline
Newbie
 
Join Date: Jan 2012
Location: Dunedin, NZ
Posts: 95
RCKiwi is on a distinguished road
Default Re: Newbie from UK

Welcome! Nice range of products you have there. I'm interested to see one of your smoker units perform in a truck or excavator! And yes, please post lots of pics on the new excavator!
Reply With Quote
  #4  
Old 07-22-2015, 05:10 AM
Digger_Bear Digger_Bear is offline
Newbie
 
Join Date: Jul 2015
Posts: 70
Digger_Bear is on a distinguished road
Default Re: Newbie from UK

Sorry I’ve tried edited my post but cannot see how, I did only mention it to give history of me but I see it could have been read as advertising.

The Magom excavator I bought is 1/14 scale, and the hydraulics in this use a high torque low speed brushless motor and HLP15 oil. I think from memory the pump details which it came with said pump works up to 35bar but the pressure bypass is set at 18bar. As it’s all new to me I don’t know if that is good or bad.

I’ve now started a post in the construction section, which has various pictures of unpacking.

http://"http://www.rctruckandconstru...09#post129609"
Reply With Quote
  #5  
Old 07-22-2015, 05:14 AM
Digger_Bear Digger_Bear is offline
Newbie
 
Join Date: Jul 2015
Posts: 70
Digger_Bear is on a distinguished road
Default Re: Newbie from UK

Quote:
Originally Posted by RCKiwi View Post
Welcome! Nice range of products you have there. I'm interested to see one of your smoker units perform in a truck or excavator! And yes, please post lots of pics on the new excavator!
Here's a quick video of the smoker in a truck

https://www.youtube.com/watch?v=gZYSJbUsY0M
Reply With Quote
  #6  
Old 07-22-2015, 03:55 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Newbie from UK

Quote:
Originally Posted by Digger_Bear View Post
Sorry I’ve tried edited my post but cannot see how, I did only mention it to give history of me but I see it could have been read as advertising.
That's ok, I just pointing it out to you incase you overlooked during registration, what you've written can remain, but if you wish to make prices for purchases public on the forum, then a Vendor forum of your own you must have.

The edit post option for OP remains intact for only 20 minutes, after that a mod, super mod or admin will have to edit for you at your request... we had to take this measure yrs ago b/c of other troubles in other areas of the forum. Change a title, edit a link, whatever, we'll fix it for you. Hit the "Contact US" button at the bottom of Index page.

Your specs on your pump sound like plenty, few hyd models I have run greater pressure than that. Depends on the size of cyls & weight of model how much pressure is necessary.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.