RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Odds and Ends. > Static Conversions

Static Conversions This is the place for all your Bruder cab and trailer conversions.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-16-2010, 10:24 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Bruder Truck-Mounted Flatbed

Had one of the Bruder lowboys collecting dust out in the garage and had given some thought to stretching it and updating with some rubber tires and new wheels but decided to go a different route instead...

The beginnings of a flatbed body is what I came up with thus far....

Oh, and I apologize for not having many pics of the first stages of this build with detailed pics of how I reinforced the center section, but rest assured she'll handle some decent weight on her back while still being on the light side with just plastic being used.







As you can see the truck on which I decided to conduct this "experiment" of a build isn't even finished yet itself....so of course you can see my priorities are in order, LOL.

But I figure it's a fun project to get the mind warmed up for some more building here and there.

More updates to come, thanks for stopping by.

-Alex
Reply With Quote
  #2  
Old 08-16-2010, 10:26 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Sorry to report no major progress lately, just a few odds and ends here and there.

Added some crossmembers on the underside to help distribute the load and reduce pressure points on the plastic sheets. Plus some makeshift brackets and a slightly modified King rear crossmember were put together to help hold this girl on the chassis...




Started to work on covering up that mess of a splice I attempted with some misc. styrene sheet and other pieces that were needing a place to rest...



And began playing around with some load ideas both for the fun of it and to see what kind of weight could be put on this thing seeing as it's held together with screws, glue, plastic-weld, and some hopes and dreams...




See you in another month with another update. (let's hope not anyway)

Thanks for looking,
-Alex
Reply With Quote
  #3  
Old 08-17-2010, 12:52 AM
Bigrigger's Avatar
Bigrigger Bigrigger is offline
Journeyman
 
Join Date: Aug 2010
Location: The beach.
Posts: 564
Bigrigger is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Looking good Alex!
Reply With Quote
  #4  
Old 08-21-2010, 10:17 PM
BigZracingRC BigZracingRC is offline
Newbie
 
Join Date: Aug 2010
Location: Louisville KY
Posts: 37
BigZracingRC is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Nice clean build!
Reply With Quote
  #5  
Old 08-22-2010, 10:22 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by BigZracingRC View Post
Nice clean build!
Thanks, yeah that's sort of my goal on most everything.....although I'll admit in some areas on the underside it might seem 'cobbled' here and there...sometimes "pretty" just isn't an option when re-inforcing with styrene. But for the most part it's clean and strong because of that.

-Alex
Reply With Quote
  #6  
Old 08-23-2010, 12:14 AM
A32Limited's Avatar
A32Limited A32Limited is offline
Newbie
 
Join Date: Aug 2010
Location: Bellevue, Washington
Posts: 69
A32Limited is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

It looks good.

The only time you should be concerned about the underside, is if your trucks spends most of it's time on it's side, or belly up. Lol...That's my view on it.
Reply With Quote
  #7  
Old 08-23-2010, 06:55 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by A32Limited View Post
It looks good.

The only time you should be concerned about the underside, is if your trucks spends most of it's time on it's side, or belly up. Lol...That's my view on it.
Haha...good point.

I'm gonna do my best to ensure the wheels stay planted.

-Alex
Reply With Quote
  #8  
Old 08-23-2010, 07:36 PM
Claus's Avatar
Claus Claus is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Hebron, In
Posts: 1,702
Claus is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Hey Alex how about adding a beavertail and a dozer?
Reply With Quote
  #9  
Old 08-23-2010, 07:53 PM
A32Limited's Avatar
A32Limited A32Limited is offline
Newbie
 
Join Date: Aug 2010
Location: Bellevue, Washington
Posts: 69
A32Limited is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by DieselKid View Post
Haha...good point.

I'm gonna do my best to ensure the wheels stay planted.

-Alex
Though I guess if you went to town on painting and detailing the chassis, because you want to park it on top of a mirror, then I guess you have an excuse. Unless you intend to make a tilt bed, or just want it detailed. Either way works. LOL

I can't wait to see it done.
Reply With Quote
  #10  
Old 08-27-2010, 09:19 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by Claus View Post
Hey Alex how about adding a beavertail and a dozer?
Had actually given that some serious thought Craig...maybe in the future.

I've thought about getting one of those Bruder 963 CAT track loaders....that'd look neat behind it I guess.

-Alex
Reply With Quote
  #11  
Old 08-27-2010, 09:21 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by A32Limited View Post
Though I guess if you went to town on painting and detailing the chassis, because you want to park it on top of a mirror, then I guess you have an excuse. Unless you intend to make a tilt bed, or just want it detailed. Either way works. LOL

I can't wait to see it done.
True, very true.....I was considering the option of a screw drive tilt bed and in that case I guess it would make sense to tidy up the underside. But since I'm not I guess I don't have much to worry about there.

Yes, I have to apologize for such a long delay in a finish. But the weather here is starting to cool down a bit (good thing) and we are getting away from the humidity for a while. Who knows, painting and detailing may be just around the corner.

-Alex
Reply With Quote
  #12  
Old 08-27-2010, 09:51 PM
cummingsman29's Avatar
cummingsman29 cummingsman29 is offline
Green Horn
 
Join Date: Aug 2010
Location: long island, new york
Posts: 231
cummingsman29 is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Looking good, glue screws, and plastic weld ! I'm building a dump trailer with it so should hold up !
__________________
DONNY
EAST COAST MINI TRUCKERS
Reply With Quote
  #13  
Old 08-28-2010, 01:31 AM
Tamiya Cowboy's Avatar
Tamiya Cowboy Tamiya Cowboy is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: South Dakota
Posts: 2,981
Tamiya Cowboy has a spectacular aura aboutTamiya Cowboy has a spectacular aura aboutTamiya Cowboy has a spectacular aura about
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by DieselKid View Post
True, very true.....I was considering the option of a screw drive tilt bed and in that case I guess it would make sense to tidy up the underside. But since I'm not I guess I don't have much to worry about there.

Yes, I have to apologize for such a long delay in a finish. But the weather here is starting to cool down a bit (good thing) and we are getting away from the humidity for a while. Who knows, painting and detailing may be just around the corner.

-Alex
Alright Alex.. Stop kicking the dog around the yard and finish this already..freddy and I will have to get the whip out on yeah..
__________________
Paul W. "Tamiya Cowboy"

HI.. My name is Paul.. And.. I.. Have a Cabover Addiction.

RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT"
Like Us on Facebook "Corn Field Mafia"



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #14  
Old 08-28-2010, 03:07 PM
Diesel Demond's Avatar
Diesel Demond Diesel Demond is offline
Craftsman
 
Join Date: Aug 2010
Location: Minnesota
Posts: 821
Diesel Demond is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

that truck is sweet for a straight truck and a budget build. what colors are you going to paint it.
Reply With Quote
  #15  
Old 08-28-2010, 06:02 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by cummingsman29 View Post
Looking good, glue screws, and plastic weld ! I'm building a dump trailer with it so should hold up !
Thanks Donny, I'm hopin' so, LOL.

-Alex
Reply With Quote
  #16  
Old 08-28-2010, 06:05 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by Tamiya Cowboy View Post
Alright Alex.. Stop kicking the dog around the yard and finish this already..freddy and I will have to get the whip out on yeah..
I didn't know you and Fred were into the whips and chains kinda thing. Each to his own I spose,

Nah man, these 10 hour Saturdays are killing me, and during the week I'm just too **** burnt out to find the motivation for the RCs.

There's always tomorrow though I spose. We'll see.

-Alex
Reply With Quote
  #17  
Old 08-28-2010, 06:07 PM
DieselKid's Avatar
DieselKid DieselKid is offline
Green Horn
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 274
DieselKid is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

Quote:
Originally Posted by tanker yanker View Post
that truck is sweet for a straight truck and a budget build. what colors are you going to paint it.
Not sure yet on color.....would love to pull off a neat yet simple two-tone job, probably a dark red almost maroon for the cab and hood with a black for the fenders.....just so many neat color combos out there it's hard to decide. Will have to do some more Googling for ideas I spose.

Oh, and thank you.

-Alex
Reply With Quote
  #18  
Old 08-29-2010, 01:40 AM
Stuff's Avatar
Stuff Stuff is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Estevan, Sk, Canada
Posts: 1,281
Stuff is on a distinguished road
Default Re: Bruder Truck-Mounted Flatbed

interesting use of a bruder drop deck!
__________________
Rc's are like pringles. You can't have just one!!
my YouTube is -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Subscribe!!
My Facebook -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #19  
Old 08-30-2010, 10:07 PM
FabOne's Avatar
FabOne FabOne is offline
Journeyman
 
Join Date: Aug 2010
Location: NW Ohio
Posts: 507
FabOne is on a distinguished road
Wink Re: Bruder Truck-Mounted Flatbed

I swear I saw a rig identical to this sitting on my workbench last week!
__________________
FabOne
NW Ohio
Reply With Quote
  #20  
Old 03-08-2014, 12:26 AM
Izzy's Avatar
Izzy Izzy is offline
Backyard enginier
 
Join Date: Aug 2010
Location: Shipshewana, Indiana
Posts: 1,825
Izzy will become famous soon enoughIzzy will become famous soon enough
Default Re: Bruder Truck-Mounted Flatbed

Awesome! I like this....
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:45 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.