RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Body Shop Tech

Body Shop Tech Body mods and tricks of the trade and painting tricks here.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-08-2017, 09:16 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Scale ratchet straps

They DON'T ratchet, i lied. But they will secure loads wery well with a fair amount of force.

Small paperclip or 18g copper or brass wire
Ribbon 3/8" or smaller
CA or other glue
Solder (optional)

This 3/8" ribbon makes a 1/14 scale 5.6" strap, or 1/16 scale 6.4" strap.

Make 2 coathangar shapes that the ribbon just passes through with the hook bent 90 deg.
Make a very flat digital 8 shape
If you want stronger, kiss it with some solder.



Toast end of ribbon, then thread ribbon through coathangar, glue end, clamp for a few seconds.
Toast other end of ribbon, thread through outside of the 8, glue, clamp.

Grab other coathangar, toast ribbon and glue. Then go figure out what length it needs to be, add a couple inches, trim and toast.

This way works, but not as well an the explination and pic after it.


Point both hooks down, thread ribbon below the 8, and up past center, come back below the leg near the hook. You may have to arch the 8 more to get the grip correct.



Pull the free end to tighten, raise the buckle to loosen.

Now, go lash something down
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #2  
Old 09-09-2017, 12:41 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scale ratchet straps

A genius idea, sir! I wish I would have thought of it. I clicked, thinking you were looking to purchase some, & was prepared with link to purchasing site. I'mm all about making things that we can make, rather than lining someone else's pockets with dough.
Reply With Quote
  #3  
Old 03-07-2019, 06:59 PM
Nikaem Nikaem is offline
Newbie
 
Join Date: Feb 2015
Posts: 113
Nikaem is on a distinguished road
Default Re: Scale ratchet straps

check this
http://www.rctruckandconstruction.co...ad.php?t=10741
Reply With Quote
  #4  
Old 03-14-2019, 10:52 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scale ratchet straps

Quote:
Originally Posted by Nikaem View Post
AWESOME find on that told post. I sadly wasn't around when that post was made & had never seen it before now.
Reply With Quote
  #5  
Old 10-16-2019, 07:20 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Scale ratchet straps

I'm far from awesome enough to make decent looking load binders like that!

So here's a 1.5" - 2" ratchet strap that i like better than the 6" wide ones for car size loads.



Better straps were of course needed for the boats, so i knocked these together with some yellow nomex 'lacing tape' about 0.080" (2mm) wide, some 0.032" (0.6mm) brass wire, and some CA glue. Making the hooks and buckles wasn't terribly fun, but it's fairly easy.
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #6  
Old 10-17-2019, 05:18 PM
Wombii's Avatar
Wombii Wombii is offline
Green Horn
 
Join Date: Feb 2018
Location: Norway
Posts: 231
Wombii is on a distinguished road
Default Re: Scale ratchet straps

They look really good. How much play time can a set of the small ones handle? And how much like threading a needle is it to use them? Should I try to make a couple of them to strap down my ladder?
Reply With Quote
  #7  
Old 02-04-2020, 06:43 PM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scale ratchet straps

Frizzy, THANKS for the Inspiration!
I tried your strap method, but I was having trouble getting the proper spacing with bending the wire. I wanted straps, so I came about a different way of making them pesky buckles.
https://www.youtube.com/watch?v=NKLXH47w7ls&t=34s
Reply With Quote
  #8  
Old 02-05-2020, 07:15 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Scale ratchet straps

Wombii, i'm honestly not sure how rugged or durable they are. It's a little fiddley using the small straps, but it's not threading the needle unless you make the hole too small. If it's difficult you could stiffen part of the strap with a clear glue

Skeeter, Looks like a great way to improve on my technique!

I like your buckle style better than mine.
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #9  
Old 02-10-2020, 08:33 PM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scale ratchet straps

Quote:
Originally Posted by frizzen View Post
Wombii, i'm honestly not sure how rugged or durable they are. It's a little fiddley using the small straps, but it's not threading the needle unless you make the hole too small. If it's difficult you could stiffen part of the strap with a clear glue

Skeeter, Looks like a great way to improve on my technique!

I like your buckle style better than mine.
Thanks!

Wombi, as frizzy mentions, the glue works well! I used a small amount of Super Glue to keep the ribbon ends from fraying when I assembled my straps.
Reply With Quote
  #10  
Old 04-08-2020, 09:39 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Scale ratchet straps

Skeeter improved on my technique, and shared it.

One of the replies to his video has released the buckle file for 3D printing
https://www.thingiverse.com/thing:4106663

Rather than glue the ends to prevent fraying, i just toast them with a lighter. Melty but not burned.
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #11  
Old 04-09-2020, 04:17 PM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: Scale ratchet straps

I wish I'd thought to toast em, rather than glue. Your method would have been a LOT easier, & less messy!
Reply With Quote
  #12  
Old 06-09-2020, 08:19 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Scale ratchet straps

I just ran across a 'ratchet' idea that should be easier and better looking than my 'bent 8' buckles. Also uses doubled hook ends that should be stronger but more tricky to make than my 'coat hangars'

Might even work better for 3D printing?

Guy takes 2 plates and 3 pins to make an offset adjuster to control the line.

Real url
https://www.modelltruckforum.de/inde...eNo=9&8d52d8f4

English
https://translate.googleusercontent....Nl2D4RQnYyXJ5Q
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #13  
Old 08-21-2020, 06:14 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: Scale ratchet straps

http://kitformservices.com/photoetch.html

1/24 scale Ratchet Straps and Chain Binders that might work for light duty stuff
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #14  
Old 08-22-2020, 08:46 PM
jerry56 jerry56 is online now
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: Scale ratchet straps

Price doesn't seem to bad for a set of 10
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:00 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.