Servo control module

[tbone4298]

I have been watching videos of European converted Schaeff mini excavators that had hydraulic like movements of servos that were not converted to continuous rotation. From my understanding of the one translated forum thread from 2010 they were using a CTI Steller Weg-Tip-Delay module that would hold the servo in it's current position. It also appeared to be able to adjust the servo travel speed. I was wondering if anyone has used or heard of these as the forum posts alluded to the company not selling to customers outside of Europe. Here are a couple sites that have the item listed.

http://www.cti-modellbau.de/CTI-Servo-Steller/-83.html
http://www.hobby-lobby-modellbau.com...Tip-Delay.html

and the build forum post
http://www.rc-baustelle.de/thread.ph...a406da92c44af0

I appreciate any advice.
Tim

[Bo Wallen]

Yes he will send to US but will charge one arm and a leg or two. Shipping and insurance for the 24 euros i order was 45 euro so no deal. I got a friend in Sweden that made my order and shipped over here for a total of $7.00
I talked with the owner on the phone and he was very nice and helpful. But no way to change any policy what so ever........just black&white. ugh.