7/8 boring or lathe ??

[oldwestrnwear]

im learning slowly how to lathe but my question is should I bore the 7/8 x 9/32 or lathe it for the bearings in the wheels of the track

[Espeefan]

I think you'll get a better fit, if you use a boring bar, or a reamer.

[oldwestrnwear]

<a href="http://s427.photobucket.com/user/oldwestrnwear/media/D11T%201-14th%20scale%20more%20or%20less%20scrath%20built/177.jpg.html" target="_blank"><img src="http://i427.photobucket.com/albums/pp359/oldwestrnwear/D11T%201-14th%20scale%20more%20or%20less%20scrath%20built/177.jpg" border="0" alt=" photo 177.jpg"/></a>


thanks espeefan

my first attempt at lathe and I found out the three jaw chuck was not true
one of the jaws was from a different set and would not line up so I thought I was doing it wrong
nothing I did was true so I thought I had to learn how to true up the 3 jawed chuck so I started watching youtube videos of lathe work (mrpete) machine shop tips great videos
that's when I figured out that the jaws were wrong well at least one of them was
7 x 10 habor freight

[doodlebug]

Check and see if the jaws are in there correct locations?
Sometimes they are numbered or labeled.
Cheers, Neil.

[oldwestrnwear]

i have checked the numbers i have jaw 1 then there is jaw 2 set number 3555 and jaw 2 set 535 there from two diverent sets of jaws
bought the lathe on craigs list now i know why the guy was selling it.
iv ordered a new 3 jaw chuck should be here in a few days
3jaw chuck from LITTLEMACHINSHOP 80 bucks