RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Kings of the Road > Euro Style Trucks and Trailers

Euro Style Trucks and Trailers A place for the Euro style trucks single and twin axle trucks and trailers...


Reply
 
Thread Tools Display Modes
  #1  
Old 08-01-2014, 02:03 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default DAF 33 small van

HI.
I thought it was time to build something different.
this time not a big truck. not a hugh machine. no a small van. even for dutch standarts it's small. it had been produced up to 1973.

I had fould a ( in lack of the right word) "sheetkit" of the daf 33. at the site of the Daf museum. and I needed to do something with it.
but the sheet was not near the right size for the 1 to 15 scale. and it wasn't the van version. well that not a big problem.



some things about the sheet aren't right

and probely the paper I printed it on was to weak. the nose is up. the back is down.
to test a new way to build an RC model. it's good that it's not a large model.
the way this one is going to build. is from cartboard. and poored over with resin. with should be sucked into the cartboard. next some pictures of the build

















the drive motor is for a sheap toy car, and it even has a diff. the speed this will give I don't know, it just might be to fast.
the little trailer will carry the sedan version to the body and paint shop I'm building. the sedan will look like my own like I pulled it out of a farmers shed after beeing there in that shed for 15 years.

Grtz PetervR
Reply With Quote
  #2  
Old 08-15-2017, 02:04 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default Re: DAF 33 small van

after running it for 3 years now. I will have an electronics update. the AA battery's last for 10 minute's or less. they will be replaced by a small lipo the speedcontroller will be swoped. the 15A will be a 10A. I need the 15A in the 2800nat. and I got the 10A for a few euro.
the front wheels will have ballbearings.
and the body needs some work. running is for 5 to 10 minutes a go. It didn't seem worth the work.
and some cardboard/resin failure need to be fixed.
this is the plan. pictures of the chainges will be here when their done

grtz PetervR
Reply With Quote
  #3  
Old 08-15-2017, 06:35 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: DAF 33 small van

The body looks really cool!
How well has the cardboard composite held up for 3 years of running?
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #4  
Old 08-16-2017, 03:01 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default Re: DAF 33 small van

one screw of the front suspention came out the cardboard. and adding all the minutes of the 3 years together, is might be just 3 ours or there about. but it was fixed to just one layer cardboard and the two spring of the frontsuspention where pulling it all the time.

the plan is to add some sheet aluminium to that bit.
other daf vans I started to build later than this one will have that aluminium between 2 layers of cardboard. or in one case an brass chassis

grtz PetervR
Reply With Quote
  #5  
Old 08-16-2017, 10:06 AM
Finster's Avatar
Finster Finster is offline
Apprentice
 
Join Date: Sep 2010
Location: NY, USA
Posts: 401
Finster is on a distinguished road
Default Re: DAF 33 small van

I love your cardboard construction methods!
__________________
Brian
Finster shavin' and smokin' a cigar?!?!
Reply With Quote
  #6  
Old 08-24-2017, 03:10 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default Re: DAF 33 small van

the cardboard idea was born from necessity, but It seems to work fine.
the little screw that came out of the cardboard. was a selftapping screw with a little bit of tread.

just little nut and bolt will fix that.
Reply With Quote
  #7  
Old 10-12-2017, 06:35 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default Re: DAF 33 small van

I got it going.
the new electronics are in.

I seem to have misplaced the hood somewhere between home and the show.

this is how it looks like under the hood.

the 11.1V lipo, connected to a switch

the switch is connected to a 5 or 6V 3A Bec

The bec is connected to a 10A ESC that esc is connected to a reciever and the drivemotor
.

thats all the electronics in this little car.

grtz PetervR
Reply With Quote
  #8  
Old 10-12-2017, 06:56 AM
Panther F's Avatar
Panther F Panther F is offline
Green Horn
 
Join Date: Apr 2011
Location: South Indiana
Posts: 296
Panther F is on a distinguished road
Default Re: DAF 33 small van

Actually this is a pretty amazing project and material to work in. As long as there is plenty of Grolsch in the ice box it'll turn out great!
Reply With Quote
  #9  
Old 10-12-2017, 07:48 AM
PetervR PetervR is offline
Newbie
 
Join Date: Jun 2012
Location: city: Rhenen, country: the netherlands
Posts: 140
PetervR is on a distinguished road
Default Re: DAF 33 small van

just one Grolsh a day. I also used 1 ore 2 of the can's in another project. I needed some thin aluminium there.
I'm working out if a cola cola truck is doable, with the bodywork made out of the coca cola can's, and it than it doesn't show its made of cans. that would most likely be a Peterbilt.
but that an other project.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.