RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Metal forming & tools

Metal forming & tools If it bends,twists,welds,cuts & turns metal.Post it here


Reply
 
Thread Tools Display Modes
  #1  
Old 12-07-2010, 10:38 AM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Another machining question

I use a "wiggler" for finding edges when I am milling and drilling holes but I can never get "dead on" spot. Wigglers depends on vision which I have a problem with. I have seen edge finders with lights that light up when the perfect edge is located. Do these work? Are they accurate? They are expensive but I don't mind spending the money if they work.
Reply With Quote
  #2  
Old 12-07-2010, 11:46 AM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: Another machining question

The ball with lights systems do work (or pin or whatever style they have now), but they should be double checked for accuracy with an indicator every once in awhile. Read up on which ever one you think about buying as some use the part as the conductor to finish the circuit for the light going through the machine and back to the spindle. This means that they won't work to find edges on non magnetic part materials or possibly in machines with ceramic spindle bearings (probably not much of a problem on the manual stuff). I have seen a few of the lighted edge finders worked by detecting the ball or whatever moving off of a conductor in the body, these should work with plastic parts etc.

On my manual equipment I typically use a jump style edge finder. These can also be had in a jump and click style so that there is an audible clicking sound once the tip has jumped. I think there are also now some made that can "jump" farther than regular, so that it is easier to see as well.

The CNC equipment I have uses a renishaw probing system so I don't really get much use of the jump style. I don't own an electronic type edge finder, but did play with a couple in tech school and an old employer. The biggest problem I saw with the ball style electronic finder was you could get chips under the ball that would hold the ball off center a bit and then give you a bad reading. Easily overcome by making sure the area is clean of chips when used and keeping the edge finder nice and clean as well.

I have never used a wiggler, so not sure what is available for them.
__________________
Jeff

Last edited by pugs; 12-07-2010 at 11:52 AM.
Reply With Quote
  #3  
Old 12-07-2010, 11:52 AM
steamer's Avatar
steamer steamer is offline
Journeyman
 
Join Date: Aug 2010
Location: Comox,Vancouver Island B.C.
Posts: 552
steamer will become famous soon enoughsteamer will become famous soon enough
Default Re: Another machining question

I get the Home Shop Machinist and in there latest issue there's an add for a laser edge finder. http://www.lasercenteredgefinder.com/main.html
Never used one myself but a machinist at work swears by them.
Rob
Reply With Quote
  #4  
Old 12-07-2010, 11:57 AM
9W Monighan's Avatar
9W Monighan 9W Monighan is offline
Big Dawg On The Bone
 
Join Date: Aug 2010
Location: Pittsburgh,PA.
Posts: 1,283
9W Monighan will become famous soon enough9W Monighan will become famous soon enough
Default Re: Another machining question

I use a Starrett edge finder and also have a Blake CoAx indicator for centering on bores and holes.
Reply With Quote
  #5  
Old 12-07-2010, 08:51 PM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: Another machining question

On the jump style finders, you still have to watch when it goes off center-correct. The laser type depends on seeing the light at the edge or center point. I think the only one that would help me is this one-
http://www.victornet.com/alphabetic/...ders/1606.html The model GAE-EF is the one I was looking at . Anyone familiar with this?
Reply With Quote
  #6  
Old 12-07-2010, 10:13 PM
pugs pugs is offline
Wannabe
 
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: Another machining question

That model is like one of the ones we had in tech school and it would not work on non conductive parts. IF all you do is steels, aluminum, brass etc then it should work fine, but plastics you have to cheat (read gage block that touches the vise).

Correct the jump style you have to watch for the jump, and some have a flat milled in the shaft so that they also click when they jump.
__________________
Jeff
Reply With Quote
  #7  
Old 12-08-2010, 12:38 PM
modelman modelman is offline
Craftsman
 
Join Date: Aug 2010
Location: Cullman Al.
Posts: 856
modelman is on a distinguished road
Default Re: Another machining question

Thanks jeff-I have a jump style that I got from my father-in-law. It has a
1/2" shank so it won't fit my mill but I can put it in the drill chuck and play with it but I don't think I can see it any better than the wiggler. I think I will try the lighted one.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.